Abstract:Realizing conversion between fluid power and mechanical energy, the closed circuit axial piston transmission (CCAPT) plays a vital and indispensable role in miscellaneous industries. The frictional loss and leakage loss inside the system give rise to the inevitable temperature rise. In order to prolong the life of the device, a cooling structure on the outside of the CCAPT is designed for promoting heat dissipation. Based on the relevant heat transfer law and the temperature distribution of internal machinery elements, a spiral fin structure is designed at the shell side. With the help of numerical simulation, the effects of fin height, fin pitch, and fin thickness on the thermal performance are studied. The flow field and temperature field on the outside of the fin structure are obtained as a guidance for enhancing heat dissipation effect. Results indicate that the area of rotating elements tend to accumulate heat, where more attention should be paid for a better cooling effect. In addition to this, a moderate increase of fin height, fin pitch and fin thickness has a positive effect on heat transfer enhancement. The peak value of Nusselt number is obtained with a fin height of 7.5 mm, which is about 2.09 times that of the condition without the fin structure. An increase in fin pitch improves both heat transfer performance and comprehensive performance at the same. When fin pitch is 30 mm, Nusselt numberincreases 104% over the original condition.

Simulation and experiment on performance of air cooler with variable fin pitch in frosting conditions

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

Numerical auxiliary study of charge-air cooler design

Temperature-gradient-enabled Prohibition of Condensation Frosting on Fin Surfaces

Cooling Performance Analysis of Outside Fins of the Closed Circuit Axial Piston Transmission

A modeling study of spatial and temporal frost growth on the edge of windward fins for a tube-finned heat exchanger

Numerical Simulation of Frosting on Wavy Fin-and-tube Heat Exchanger Surfaces

Frost model and numerical simulation of air-heating fin-tube vaporizer

Experimental Study on the Frosting and Heat Transfer Performance of Three Rows of Variable Pitch Finned Coils

Experimental Study of Frost Formation on Cold Surfaces with Various Fin Layouts

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory

Effect of Different Plenum-Chamber Coefficients on the Frosting of Air-Cooler

Experimental study on heat transfer characteristics of flowing air on the surface of finned-tube vaporizer under frosting conditions

Experiment on Frost Characteristic of Air-warmed Cryogenic Finned-tube Vaporizer

Numerical simulation on the frosting and heat transfer characteristics of plate-fin heat exchanger considering confinement effect

A modified CFD model for frosting on a horizontal plate

Numerical Simulation of Frost Layer Growth on a Horizontal Plate

Energy conservation performance of finned-tube heat exchanger under frosting condition

An Experimental study of low-temperature finned-tube heat exchanger in frosting conditions

Temporal and spatial frost growth prediction of a tube-finned heat exchanger considering frost distribution characteristics

Performance Analysis and Structural Optimization of a Finned Liquid-Cooling Radiator for Chip Heat Dissipation