Abstract:<p>In order to improve engine performance by reducing hydrocarbon (HC) emissions from cold start of gasoline engine, firstly, cold-start emission control measures such as pre-treatment (including engine intake, fuel, and some engine timing parameters control studies to make air and fuel fully mixed and completely burned) and after-treatment (including oxidation of exhaust gas through the after-treatment system to reduce it to the atmosphere) are mainly summarized. Due to the particularity of the cold start conditions, engine after-treatment system can not be run in time, HC adsorption technology came into being. HC is adsorbed before after-treatment system functioning, and HC is not released until the after-treatment system works. In this paper, the experimental and simulation research on different adsorption materials (mainly including adsorption materials with different structure, size, heterogeneity, silicon to aluminum ratio and other parameters, different preparation and coating methods and different ion exchanged) used to control HC emission during cold start are summarized. Based on our work, the current research status of gasoline engine cold start HC control technology can be more clearly presented to relevant researchers. Through this article, the corresponding research results that have been obtained can be found more conveniently and comprehensively. And repeated research can be avoided well. At the same time, it is helpful for researchers to seek new research directions and paths for controlling the cold start HC emissions. The work done in this paper can effectively promote the further research and development of gasoline engine cold start HC emission control technology.</p>

Review on HC Emission and Control During Cold Start and Warming-up Processes of SI Engines

A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine

Hydrocarbon adsorption mechanism of modern automobile engines and methods of reducing hydrocarbon emissions during cold start process: A review

Review of the Progress in Homogeneous Charge Compression Ignition Combustion

Experimental study of reducing si engine emissions during cold-start and warm-up phase based on thermal management strategies with a heater

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

Study on formation process of in-cylinder unburned hydrocarbons during cold start and idling periods in spark ignition engines

Effects of engine load, inlet air temperature, valve overlap and EGR on diesel HCCI engine

A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 2. Effect of operating conditions and EGR on HCCI combustion

The Effects of Unburned Hydrocarbon Recirculation on Ignition and Combustion During Diesel Engine Cold Starts

Investigation on unburned hydrocarbon emissions in spark ignition engine

Starting Control Strategy and Experimental Study of CNG Engine

Review on Selective Catalytic Reduction Technology of Diesel Engines

Investigation of Gasoline Engine Cold-Start and Warm-up for Parallel Hybrid Electric Vehicle

A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion

Study of low emission homogeneous charge compression ignition (HCCI) engine using combined internal and external exhaust gas recirculation (EGR)

Control of Intake Boundary Conditions for Enabling Clean Combustion in Variable Engine Conditions under Intelligent Charge Compression Ignition (ICCI) Mode

Recent Progress on Research and Development of HCCI Engine

State-of-the-art outlook for light-duty vehicle emission control standards and technologies in China

Fuel injection and EGR control strategy on smooth switching of CI/HCCI mode in a diesel engine

Closed-loop control of low temperature combustion and transition process of diesel engine