Abstract:Solid oxide fuel cell (SOFC) is a clean and efficient power generation device, which has been widely used in recent years. However, its operation lifetime still needs to be improved to meet the requirements of further commercialization. The performance degradation of SOFCs is affected by many factors. It is meaningful to distinguish these factors and determine the dominant factor(s) for extending the operation lifetime. In this work, the initial operation stage (<100 h) of Ni-YSZ anode-supported SOFCs is mainly focused, since it has been found that the electrochemical performance changes most significantly in this stage. The electrochemical impedance spectroscopy (EIS) is continuously monitored during the operation of cells. Different electrode processes are distinguished through coupled distribution of relaxation time (DRT) and equivalent circuit model (ECM) analysis. Accordingly, the changes of different electrode processes in the initial-stage operation are obtained by detailed comparative analysis of EIS. It’s found that SOFCs go through activation stage and aging stage in turn: i) In the activation stage, the residual NiO in the anode is further reduced, so the porosity of the anode increases and the gas phase diffusion is enhanced, resulting in the performance improvement of the cell. ii) In the aging stage, the Ni particles in the anode agglomerate, so the effective three phase boundary (TPB) density decreases, which leads to the degradation of anode interface reactions and the drop of cell performance. Besides, we speculate that the dominant degradation mechanism in long-term operation (>100 h) is the continuous increase of the anode interface reaction-related resistance, which is mainly caused by gradual agglomeration of Ni particles. This evolution mechanism of electrochemical performance is then confirmed by detailed microstructure characterization. Figure 1

Analysis of Three-Dimensional Microstructure Evolution of Tested Ni-YSZ Anodes by Nano-CT

Quantitative Analysis of Micro Structural and Conductivity Evolution of Ni-YSZ Anodes During Thermal Cycling Based on Nano-Computed Tomography

Analysis of the Three-Dimensional Microstructure of a Solid-Oxide Fuel Cell Anode Using Nano X-ray Tomography

Quantitative analysis methods for three-dimensional microstructure of the solid-oxide fuel cell anode

Quantitative study on solid oxide fuel cell anode microstructure stability based on 3D microstructure reconstructions

Comparative study on solid oxide fuel cell anode microstructure evolution after long-term operation

Microstructure degradation of Ni/CGO anodes for solid oxide fuel cells after long operation time using 3D reconstructions by FIB tomography

Tracking solid oxide cell electrode microstructural evolution during annealing by scanning 3D X-ray diffraction microscopy

Modeling of Gas Transport with Electrochemical Reaction in Nickel-Yttria-Stabilized Zirconia Anode During Thermal Cycling by Lattice Boltzmann Method

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Microstructure Evolution Analysis of Ni/YSZ Cermet Electrode using Cross-Sectional Model Cells

Failure Analysis of Ni-8YSZ Electrode under Reoxidation Based on the Real Microstructure

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

The Detection of Monoclinic Zirconia and Non-Uniform 3D Crystallographic Strain in a Re-Oxidized Ni-YSZ Solid Oxide Fuel Cell Anode

Microstructure Tailoring of the Nickel Oxide-Yttria-Stabilized Zirconia Hollow Fibers Toward High-Performance Microtubular Solid Oxide Fuel Cells

Effects of Nickel Oxide Impurities on the Microstructure and Electrical Properties of a Nickel–yttria-Stabilized Zirconia Anode

The Study of the Reconstructed Three-Dimensional Structure of a Solid-Oxide Fuel-Cell Cathode by X-ray Nanotomography.

Performance Evolution of Ni-YSZ Anode-Supported SOFCs During Initial-Stage Operation

Electrochemical and Microstructural Characterization of Cyclic Redox Behaviour of SOFC Anodes

Fracture Simulation of Ni-YSZ Anode Microstructures of Solid Oxide Fuel Cells Using Phase Field Method

Three-Dimensional Microscopic Modeling And Activation Thickness Analysis Of The Anode Of Solid Oxide Fuel Cells