Abstract:Flooding is the phenomenon in which part of the liquid is entrained by gas and carried to above the injection point in countercurrent gas-liquid tow-phase flow. The applicability and accuracy of the commonly used empirical formulas that obtained from the experimental data of room temperature fluids for the cryogenic fluids need to be verified. The present work investigates the mathematical model for the onset of flooding and exploring the exact mechanism at liquid nitrogen temperature. The following contents are included: (1)Based on the hydrohaulic similarity, a 3D geometrical model consisting triangle channels is proposed, in which the number of grids is reduced greatly. The simulation results of wetted area, liquid mass flow fluctuation at the outlet, spatial liquid film thickness variation and pressure drop are analyzed, and qualitatively agree with previous experimental observations. This simulation quantificationally reveals the characteristics and influencing factors of countercurrent gas-liquid flow before the flooding is onset, preparing for the further theoretical analysis. (2)Using the linear stability theory, a circumferential wave number is introduced into the governing equations to develop the three-dimensional mathematical model for predicting the interfacial instability and further the onset of flooding, while the internal relations between the interfacial instability and the non-axisymmetric perturbations, flow velocities, physical properties and tube diameter are announced. The results agree with the experimental data well, and prove that the circumferential perturbations can delay the onset of flooding. (3)A mathematical model for predicting the onset of flooding in an inclined tube is developed based on the linear stability theory. Thee results are in good agreement with the experimental data in the open literatures. The flooding velocity for cryogenic fluids is found to be much lower than that of room temperature ones. (4)A visualization experimental facility for flooding in an inclined tube is designed and manufactured. For the air-water pair, the “slug” flow in the tube is the feature the flooding process, while the interfacial waves can keep the shape on the whole. While, the unique mist flow is formed for the cryogenic working pair. The comparison shows that the developed model presented in this work can predict the onset of flooding both for room temperature and cryogenic working pairs.

Numerical Investigation on the Reflooding of a hot Vertical Bundle-channel by RELAP5

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Research on thermal hydraulic characteristics of reflooding process based on core multi-channel model in system analysis code

Numerical Simulation of Incompressible Interfacial Flows by a Level Set Re-Distancing Method with Improved Mass Conservation

Development and assessment of a three-field subchannel code for thermo-hydraulic transient analysis under reflood conditions

Reflooding characteristics investigation and predicted models improvement for the pressurized water reactor with the tight lattice core design

Numerical investigation of transient hydrodynamic properties during reflood with early power termination using the COSINE subchannel code

Experimental investigation on transition boiling during reflooding in a narrow rectangular channel with high wall temperature

Experimental and Numerical Investigation of Sub-Cooled Boiling, Condensation, and Void Flashing in Nuclear Heating Reactor Test Loop

Development of A New Heat Transfer Model Near the Quench Front in the Reflooding Phase of A Tight Lattice

Numerical Simulation of AP1000 LBLOCA with SCDAP/RELAP 4.0 Code

A Mathematic Model of Two-Phase Flow Taking Account of Sub-Cooled Boiling, Condensation, and Void Flashing

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Toward a Better Understanding of Reflood Thermal Hydraulics: A Summary of the OECD/NEA RBHT Project

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Annual Project Report on Interface Formation Principal of Large-scale and Unsteady Flow

Numerical investigation on critical heat flux for 5 × 5 fuel assemblies with a wide range of working conditions

Numerical Simulation of Multi-Dimensional Two-Phase Transient Flow across Bundles

The Numerical Simulation Research of Gas–Liquid Two-Phase Flow in Small-Break Loss-of-Coolant Accidents