Abstract:BackgroundLoss of Coolant Accidents (LOCAs) is a crucial research topic for nuclear reactor safety analysis, and understanding the thermal–hydraulic behavior of the rod bundle channels during the reflooding stage of a LOCA is essential.PurposeThis study aims to develop theoretical models of the reflooding stage in addition to providing benchmark data for evaluating the safety analysis code for LOCAs in a reactor and for the design of the residual heat removal system.MethodsA series of bottom reflooding tests were conducted on a 5×5 rod bundle in the film boiling test facility at the nuclear safety and operation laboratory (NUSOL) of Xi'an Jiaotong University using uniformly heated rods. The experimental results were analyzed in detail, and the surface parameters of the heated rod bundle were obtained by solving a one-dimensional transient inverse heat conduction problem. The effects of different experimental conditions on the velocity of the quench front propagation were investigated. Furthermore, the experimental results were compared and calculated using the thermal safety analysis code, and the problems with the thermal safety analysis code RELAP5 reflooding simulation are summarized.ResultsOur results indicate that a high inlet flow rate, high inlet subcooling degree, and low power density are favorable for the propagation of the cold front during the reflooding process. Additionally, the root mean square (RMS) error of the simulated quench time and peak cladding temperature (PCT) are 40.994 s and 61.465 K, respectively. However, the simulation results have a relatively large error compared with the experimental results in the post-critical heat flux (CHF) heat transfer stage, primarily owing to the issues with the boiling mode judgment and membrane boiling heat transfer model.ConclusionsThe experimental data of this study can serve as new verification data for flow and heat transfer prediction models during the reflooding process; it can also be used to evaluate and optimize the thermal-hydraulic safety analysis code. Loss of Coolant Accidents (LOCAs) is a crucial research topic for nuclear reactor safety analysis, and understanding the thermal-hydraulic behavior of the rod bundle channels during the reflooding stage of a LOCA is essential.

Development of A New Heat Transfer Model Near the Quench Front in the Reflooding Phase of A Tight Lattice

Development of a New Model to Predict Heat Release in Vicinity of Quench Front in Tight Lattice

Reflooding characteristics investigation and predicted models improvement for the pressurized water reactor with the tight lattice core design

Experimental Investigation of Quench Front Propagation During Reflooding in 5 × 5 Rod Bundle Channel with Axial Uniform Power Distribution

Experimental Study on Combined Reflooding Phenomenon and RELAP5 Simulation Analysis in Narrow Rectangular Channel

Experimental Investigation of the Transient Pool Boiling Heat Transfer on the Quenching of Vertical Rodlet in Water

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Experimental Investigation of Bottom Reflooding and Modeling of Quench Velocity in a Narrow Rectangular Channel

An Experimental Study of Boiling Heat Transfer and Quench Front Propagation Velocity During Quenching of a Cylinder Rod in Subcooled Water

Numerical Investigation on the Reflooding of a hot Vertical Bundle-channel by RELAP5

Experimental investigation of bottom reflooding for uniformly heated 5×5 rod bundles and evaluation of thermal safety analysis code

Cfd -Based Modelling On Inter Facial Heat Transfer For Water Quenching

A heat transfer model for liquid film boiling on micro-structured surfaces

Experimental investigation on transition boiling during reflooding in a narrow rectangular channel with high wall temperature

Development and Assessment of Five-Component Wall Boiling Heat Flux Partitioning Model

A Mathematic Model of Two-Phase Flow Taking Account of Sub-Cooled Boiling, Condensation, and Void Flashing

Some recent progress in reactor core thermal-hydraulics modelling

Experimental Investigation and Modeling of Falling Film Heat Transfer on Partial Dry-out Condition

Development of a new semi-mechanistic wall boiling heat transfer model for CFD methodology focusing on macroscopic parameters

Improvement of Reflood Model in RELAP5 Code Based on Sensitivity Analysis

Improvement and Validation of the Wall Heat Transfer Package of RELAP5/MOD3.3