Abstract:As the only one design using water as coolant in Generation IV Nuclear Energy Systems proposed by Generation IV International Forum (OFF), supercritical water cooled reactor (SCWR) has been widely investigated due to its advantages of simplicity, high thermal efficiency, good economy and safety. The Sino-Euro corporation project Supercritical Water Reactor-Fuel Qualification Test (SCWR-FQT) is proposed to analyze and verify a supercritical water-cooled experiment loop containing a small scale fuel assembly and provide support to this loop's design and license application. To solve the problems above, this paper will carry out the preliminary safety research for the SCWR-FQT facility. Several thermal-hydraulic codes (including CFD code, subchannel code, system code) are selected to perform the safety analysis in the facility. COBRA and ATHLET have been modified by implementing the heat transfer model, turbulent mixing and friction models which are applied to supercritical water cooled reactors into the previous code. To determine the detailed thermal-hydraulic behavior in the bundle region at some transient condition, the multi-scale coupled code has also been developed by transferring the pressure at the core outlet, coolant temperature at the core inlet, coolant mass flow rate at the core inlet, heat generated in the active core and pressure friction coefficient of SCWR-FQT. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test and fuel bundles can be cooled effectively with safety measures in accidental conditions. The CFD results show that wire-wrap has large influence on heat transfer. The subchannel code presents that the cladding temperature will be highest when blockage occurs in the corner subchannel. Meanwhile, the coupled results show that the coupled code can predict the accurate accident procedure and detailed parameters distribution.

Pre-Conceptual Design and Analysis of a SCWR-FQT Loop Test Section Based on CSR1000

Multi-scale Thermal-Hydraulics Analysis on SCWR Fuel Qualification Test Loop

Coupled Neutronics and Thermal–Hydraulics Analysis of Annular Fuel Assembly for SCWR

Optimization of a Fuel Assembly for Supercritical Water-Cooled Reactor CSR1000

Preliminary Conceptual Design Study on Supercritical Water-Cooled Reactor CSR1000A with Annular Fuel

Pre-Conceptual Core Design of Scwr with Annular Fuel Rods

Preliminary safety analysis for the SCWR-FQT facility

Study on the Layout of the SCWR Fuel Assembly

Design Analysis of a New SCWR Fuel Assembly Using a Coupled Method

Multi-layer Fuel Assembly Design Proposal for Supercritical Water Cooled Reactor

Coupling analysis on a new SCWR core design

Concept Design of Supercritical Water Cooled Reactor Core with Double-Row-Rod Assemblies

Thermal-hydraulic and Neutron-Physical Characteristics of a New SCWR Fuel Assembly

Loss of Coolant Flow Accident Analysis for SCWR-FQT Loop

Physical analysis of SCWR-FQT facility based on RMC

Coupled Analysis of SCWR With Annular Fuel Assembly

Coupled thermal-physics analysis of SC WR-FQT loop

Loss of Coolant Accident Analysis of Supercritical Water-cooled Reactor Fuel Qualification Test Loop

A multi-group Monte Carlo core analysis method and its application in SCWR design

Core design study of a supercritical light water reactor with double row fuel rods

Thermal-Hydraulic Analysis For Experimental Device Of Supercritical Water Reactor-Fuel Qualification Test