Abstract:Fluorine High-temperature Reactor (FHR) is a novel reactor type without water-cooling, but with a high outlet temperature. Small Modular FHR is convenient for modular assembly and transportation. Therefore, it is suitable for remote and water shortage areas to provide efficient and clean nuclear energy. The neutronics and heat transfer of the fuel are the key issues when the small modular FHR has high thermal power output. This research proposes the fuel - TRISO (TRi-ISOtropic) particles dispersed in Helical Cruciform Fuel (HCF). HCF can be selfsupported in radial direction, no additional grid-spacers are required, which can decrease the pumping power and improve the efficiency of the reactor system. For small modular FHR, it can be disassembled, transported, and assembled better without grid-spacers and simplifying the core structure. The heat transfer capacity of the coolant also could be further improved because of the special structure of HCF. Based on the Monte-Carlo particle transport code MCNP, the neutronic characteristic from the assembly to the whole core of FHR is studied. By obtaining the fission power distribution in near-critical condition, the thermal-hydraulics of the single most heated HCF and 7 bundle HCF in the heated assembly are calculated. In order to preliminary analyze the thermalhydraulics of the whole core scale, the thermal-hydraulics analysis of porous media is carried out for 1/6 core. The isotropic resistance tensor and thermal equilibrium porous model have been introduced with reasonable approximation, and porous resistance relation has been carried out. The radial power peak factor is 1.185 and the axial power peak factor is 1.435 in near-critical condition, which proves the arrangement of the HCF and the control rods can flatten the power distribution effectively. The average temperature of the coolant outlet in the active region of the core is 974.44 K, and the average temperature of the upper plenum outlet is 972.85 K. High coolant outlet temperature can ensure effective supply of high-temperature process heat. And the highest temperature of the fuel is 1271.49 K, which is lower than the limitation 1573 K. The parameters of this research can supply the neutronics and thermal-hydraulics references for further FHR design.

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

Thermal Hydraulic Studies of a Fluoride Salt Cooled High Temperature Test Reactor With Different CFD Methods

Thermal-Hydraulic Analysis of A Fluoride-Salt-Cooled Pebble-Bed Reactor with Cfd Methodology

Development of a Thermal-Hydraulic Analysis Code and Transient Analysis for a Fluoride-Salt-Cooled High-Temperature Test Reactor

Analysis of the Limiting Safety System Settings of a Fluoride Salt–Cooled High-Temperature Test Reactor

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Development of a Thermal-Hydraulic Analysis Code and Transient Analysis for a FHTR

Licensing Considerations Of A Fluoride Salt Cooled High Temperature Test Reactor

Analysis of Limiting Safety System Setting Based on Computational Fluid Dynamics Methodology for a Fluoride Salt Cooled High Temperature Reactor

Experimental Studies On The Thermal-Hydraulics Of Dowtherm A Through The Pebble Bed With Internal Heat Generation

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Fluoride-salt-cooled High-Temperature Reactors: Review of Historical Milestones, Research Status, Challenges, and Outlook

Three-dimensional thermal hydraulic analysis of a transportable fluoride-salt-cooled high-temperature reactor

High-Fidelity Neutronics and Thermal-Hydraulics Analysis of Helical Cruciform Fuel Based on Small Modular Fhr

Thermal-Hydraulic Analyses of Transportable Fluoride Salt–Cooled High-Temperature Reactor with CFD Modeling

Experimental Investigation of Flow and Convective Heat Transfer on a High-Prandtl-number Fluid Through the Nuclear Reactor Pebble Bed Core

Thermal analysis of pebble-bed reactors based on a tightly coupled mechanical-thermal model

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

Study on tritium transport characteristics in fluoride-salt-cooled high-temperature advanced reactor

STUDY ON FREEZING TOLERANCE DESIGN OF THE DIRECT REACTOR AUXILIARY COOLING SYSTEM (DRACS) FOR FLUORIDE-SALT-COOLED HIGH-TEMPERATURE REACTOR (FHR)