Abstract:In order to support the verification of neutronics/thermal-hydraulics coupling calculation method or simulation codes at the pin-by-pin wise fine mesh for plate-type pressurized water reactor (PWR) with high parameters (which the ratio of power to mass flow rate is greater than 235 kW/kg, the core outlet enthalpy exceeds 1500 kJ/kg), a set of coupling calculation of plate-type PWR based on high parameters (COPHP) is design by Nuclear Power Institute of China (NPIC). Multiple industry research teams, including Tsinghua University, Xi'an Jiaotong University, and Huazhong University of Science and Technology, participated in the production of COPHP benchmark. This article provides a detailed explanation of the completed assembly design and modeling calculations, and provides the keff, pin-by-pin wise fine mesh relative power distribution, and deviation results calculated for 10 conditions of 6 assemblies using RMC, OpenMC, and KYLIN V2 software. The results show that: 1) when using the same cross-sectional library, the OpenMC calculation results are in good agreement with the RMC results. Taking ENDF/B-VII.1(ACE) as an example, the maximum deviation of keff in the entire burnup process of all assemblies is -157pcm, the maximum deviation of relative power is -1.13%, and the maximum power weight error(PWE) is 0.226%. 2) Compared between KYLIN V2 and the RMC by using ENDF/B-VII.1 (ACE), the maximum deviation of keff is -468pcm, the maximum deviation of relative power is -1.49%, and the maximum PWE is 0.316% when calculating the standard assemblies with all control rod out(ARO) condition and two burnable poison assemblies. The maximum deviation of keff is -795pcm, the maximum deviation of relative power is 1.81%, and the maximum PWE is 0.369% when calculating the standard assemblies with all control rod inserted(ARI) conditions.

SCWR assembly designs with peripheral moderator channels

Study on the Layout of the SCWR Fuel Assembly

Optimization of a Fuel Assembly for Supercritical Water-Cooled Reactor CSR1000

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Physical Design of High-Performance Fuel Assembly Based on Fully Ceramic Microencapsulated Fuel for Supercritical CO2 Cooled Reactor

A multi-group Monte Carlo core analysis method and its application in SCWR design

General flow sweeping mixing model for subchannel analysis and application to three rod bundles with different typical spacer methods

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Preliminary study on physical characteristics of single‐pass super‐critical water‐cooled reactor core

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

CFD investigation for a 7-pin wire-wrapped fuel assembly with different shapes of fuel duct wall

Optimized Moderator Design and Analysis of a Pin-Type Supercritical Carbon Dioxide Reactor Based on Reactor Monte Carlo Code

A Simplified Supercritical Fast Reactor with Thorium Fuel

Shutdown Margin for High Conversion BWRs Operating in Th-233U Fuel Cycle

Assemblies Design and Modeling Analysis of a New Pin-by-pin Wise Fine Mesh Neutronics/thermal-Hydraulics Coupling Benchmark for Plate-Type PWR Core

New Structure Design for SCWR Internal Components

Numerical investigation on mixing performance in rod bundle with spacer grid based on anisotropic turbulent mixing model

Neutronic analysis of fuel assembly loading patterns in small integrated pressurized water reactor core and fuel shifting strategy concept design

Thermal Hydraulic Design and Evaluation of the Solid Microencapsulated Fuel in Light Water Reactors

Development of a refined helical fuel mixing model and application to a helical fuel rod bundle

A new structure design to extend graphite assembly lifespan in small modular molten salt reactors