Abstract:BackgroundThe application of high-energy medical electron accelerators in the radiotherapy becomes more and more widespread. Study of the radiation source and shielding of high-energy medical electron accelerators has been the focus of attention.PurposeThis study aims to simulate 15 MV X-ray beam of Clinac 23EX medical linear accelerator by using Monte Carlo method.MethodsFirst of all, a fine geometric model of the accelerator head in X-ray mode was constructed according to the material composition and geometric dimensions of the internal parts of the head provided by the manufacturer. Then the Monte Carlo N-Particle Transport Code (MCNP) software was applied to the calculation of the percentage depth dose (PDD) curves and profile curves of the X-ray beam under different irradiation fields. Comparisons of those results with that of measured results at the same conditions in the three-dimensional (3D) water model were performed. In addition, the effects of different components on the X-ray energy spectrum and penetration ability were analyzed.ResultsThe simulation results of the PDD curves and profile curves are in good agreement with the measured results of 3D water tank. The relative deviation of PDD curves is in the range of 0.62% to 1.34%, and the relative deviations of profile curves are between 0.35% and 2.76% in high dose area and 0.48% to 5.86% in low dose area, respectively.ConclusionsIt is confirmed that the detailed model of the accelerator head established in this study is accurate and reliable, hence appliable to the subsequent analysis of various source items. The effects of different components of accelerator on the X-ray energy spectrum and penetration ability provide references for optimizing shielding design and radiotherapy plan.

MCNP5 Study for the Radiation of Mobile Industrial Gamma-Radiography

MCNP simulation of X-ray beam for a 15 MV medical linear accelerator

Monte Carlo Simulation of Indoor External Exposure due to Gamma-emitting Radionuclides in Building Materials

Shielding Research of Minitype Reference Radiation Device Based on Monte Carlo Simulation

Estimation of Neutron Exposure Dose with the Monte Carlo Method

Monte Carlo Simulation of Radiation Dose Distribution in X-ray Imaging at Shanghai Synchrotron Radiation Facility.

3-D Radiation Field Reconstruction for a Facility With Multiple Radioactive Sources

Monte Carlo simulation investigation on the Minitype Reference Radiation employed for the calibration on gamma ray dose or dose rate meters.

A model to predict indoor concentrations and internal radiation doses of radioactive aerosols from nuclear accidents

The Use of DOSXYZnrc to Simulate a Voxel Phantom in Radiation Protection

Monte Carlo simulation of whole body dose distribution in patients with total body X (γ) ray irradiation

MCNP simulations of medical diagnostic X-ray spectra

3-D Gamma Radiation Field Reconstruction Method Using Limited Measurements for Multiple Radioactive Sources

Modeling Dose-Rate On/over the Surface of Cylindrical Radio-Models Using Mont Carlo Methods

The transmission calculation by empirical numerical model and Monte Carlo simulation in high energy proton radiography of thick objects

A Monte Carlo Simulation Dataset of Radiation Field Parameters for a Simple Nuclear Facility Scenario

Monte Carlo Simulation for Internal Radiation Dosimetry Based on the High Resolution Visible Chinese Human

Calculated organ doses for Mayak production association central hall using ICRP and MCNP

Organ Dose Conversion Coefficients For External Neutron Irradiation Based On The Chinese Mathematical Phantom (Cmp)

Dose rate evaluation in a laboratory for prompt gamma neutron activation analysis by Monte Carlo simulation

Analysis of Corrected Cerenkov Emission During Electron Radiotherapy by Monte Carlo Method.