Abstract:[Background]The use of controlled X-ray sources instead of 137Cs radioactive sources in density logging has become a new trend.The intensity of the X-ray source is substantially influenced by the high voltage on the target substrate,and the density measurement uncertainty can be maintained at 0.01 g·cm-3 when the high voltage is 350 kV.[Purpose]This study aims to analyze the parameters of the shielding material and thickness suitable for the 350 kV high-voltage X-ray density logging instrument.[Methods]The Monte Carlo method was used to analyze the energy spectrum and counting rate of X-rays passing through different materials and thicknesses.By comparing the correlation between the 0～0.15 MeV and 0.15～0.35 MeV energy windows,the reasons for the difference between the X-ray attenuation and detector count rate in different energy windows were determined.In addition,combined with the actual instrument model construction of the four-detector X-ray density logging instrument,the influence of the three parts of particles on the detector was primarily considered.The placement mode and optimal thickness of each part of the shield for detectors were analyzed and designed using Monte Carlo N-particle(MCNP)simulation.[Results]The simulation results show that the attenuation of X-rays in high-and low-energy windows increases with increase of atomic number and thickness of shielding materials.When tungsten nickel iron alloy is selected as the shielding material for the four-detector X-ray density logging instrument model,the suitable thickness of the shield between the base and the near-source detector is 1.75 cm.Meanwhile,to maintain the high voltage of X-ray generator at 350 kV,a shield layer with a thickness of 0.2 cm is placed between each detector,and a shield layer with a thickness of 0.35 cm is added to the back of the detector.[Conclusions]This study provides the design theory and key parameters for shielding materials and structures in the development of X-ray density logging tool.

Shielding Research of Minitype Reference Radiation Device Based on Monte Carlo Simulation

Monte Carlo simulation investigation on the Minitype Reference Radiation employed for the calibration on gamma ray dose or dose rate meters.

Monte Carlo Simulation Research of 137 Cs Minitype Reference Radiation

Shielding Design of the Multi-Purpose Reflectometer of China Spallation Neutron Source

Simulation of Gamma Minitype Reference Radiation for Calibration of Personal Dosimeter

Study on Optimization Design of Compact and Lightweight Radiation Shielding Material for Vehicle-mounted Accelerator-driven D-D Neutron Source

Structural Shielding Design of CT Facility using Monte Carlo Simulation

Study on the Design and Experimental Verification of Multilayer Radiation Shield Against Mixed Neutrons and Γ-Rays

Development of a Radiation Shielding Monte Carlo Code: RShieldMC

Monte Carlo Calculation of the Shielding of Mail Irradiation Systems

New Cf-252 neutron source shielding design based Monte Carlo simulation using material combination

Simulation research on the characteristics of a minitype neutron reference radiation field

Experimental Verifications for a Multiobjective Shielding Design Method on a P-Be Neutron Source with Injection of 7 MeV Protons

Shielding Capability Research on Composite Base Materials in Hybrid Neutron-Gamma Mixed Radiation Fields

Monte Carlo Simulation Analysis of X-ray Density Logging Shields

Optimal Shielding Structure Design for a Typical 14 MeV Neutron Source

Feasibility Study on Determining the Conventional True Value of Gamma-Ray Air Kerma in a Minitype Reference Radiation

Study on Composite Material for Shielding Mixed Neutron and $\Gamma$-Rays

Monte Carlo method for analyzing research reactor shielding

Monte-Carlo-Point-Kernel Coupling Gamma Ray Shielding Analysis Based on Necp-Mcx

Efficient and Accurate Optimal Design Method for Radiation Shielding