Abstract:SF6 has good insulation performance and is widely used in power equipment. But as climate change intensifies, the need for substitute gases is growing. While a lot of research focusing on the insulation performance of substitute gases has been done, little has been focused on their effects on temperature rise, though temperature rise is important for the safe operation of the power equipment. In this article, a 40.5-kV medium-voltage cubic gas-insulator switchgear (C-GIS) is modeled and simulated by the electromagnetic-fluid-temperature multiphysical coupled method. By implementing CFX Expression Language (CEL), the influence of temperature on thermal conductivity, density, viscosity, and specific heat capacity of gas is able to be coupled into the simulations, thus improving the accuracy of the simulations. The airflow and temperature distribution of the C-GIS with SF6 are obtained, and the temperature rise distribution is verified by experimental results. On this basis, simulation studies are conducted to analyze the influence of different filling gases on the temperature rise of the C-GIS. First, the influence of single filling gases including N-2, CO2, and pressurized air is analyzed by the simulations. Second, the temperature rise distributions of the C-GIS when filled with a mixture of SF6 and N-2 with different proportions of mole fraction are also obtained. By analyzing the changes in temperature rise distribution under different situations, it can be found that the temperature rise with N-2, CO2, or pressurized air is relatively high. When the gas mixture is used, the maximum temperature tends to decrease with the increase of SF6 usage. According to the results of this article, it can provide a reference for selecting suitable substitute gas of SF6.

Heat Dissipation Analysis of the CF3I Gas and Its Mixtures Using in Gas Insulated Transmission Line

Heat Transfer Analysis of Different Conditions for SF$_{6}$/N$_2$ Gas-Insulated Transmission Lines

Lighting Impulse Withstand Performance of CF 3 I-N 2 Gas Mixture for 252 Kv GIL Insulation

Analysis of the Insulation Properties of CF3I and CF3I-N2Gas Mixtures from Electron Transport Parameters

Investigation of the Performance of CF3I/c-C4F8/N2 and CF3I/c-C4F8/CO2 Gas Mixtures from Electron Transport Parameters

Analysis of Insulation Performance and Polar Effect of CF3I/CO2 Mixtures

Insulation Characteristics for CF3I-CO2 Gas Mixtures with Low Proportion of CF3I in Extreme Non-uniform Electric Field

Study on the Insulation Properties of the Mixture of SF6 Substitute Gas and Air

Conceptual Design and Feasibility Study of Flexible Gas-Insulated Transmission Line Using CF3I Gas Mixture

Application and Development of Gas Insulated Transmission Line (GIL)

Insulation Characteristics of C-C$_4$ F$_8$-N $_2$ and CF$_3$ I-N$_2$ Mixtures As Possible Substitutes for SF$_6$

Simulation Analysis on the Impact of Different Filling Gases on the Temperature Rise of C-GIS

Analysis of the Insulation Characteristics of Cf3i Gas Mixtures with Ar, Xe, He, N-2, and Co2 Using Boltzmann Equation Method

Investigation of Dielectric Properties of Cold C3F8 Mixtures and Hot C3F8 Gas As Substitutes for SF6

Experimental Study on the Decomposition Products of CF3I/N2Gas Mixtures

Analysis of the Insulation Characteristics of CF3I Mixtures with CF4, CO2, N2, O2and Air

Calculation of the Insulation Properties of Different CF3I-N2 and CF3I-CO2 Mixtures at 300 K

Insulation Characteristics of C3F8 Ternary Gas Mixtures from Electron Transport Parameters and Microscopic Properties

Discharge Characteristics of CF3I/N2 Mixtures under Lightning Impulse and Alternating Voltage

Numerical Modelling of Positive Surface Discharges in C-C<sub>4</sub>F<sub>8</sub>/CF<sub>3</sub>I/N<sub>2</sub> Gas Mixture under Non-Uniform Field

AC Breakdown Characteristics of CF3I-N2 Gas Mixtures in Condition of Quasi-homogeneous and Extremely Non-uniform Electric Field