Abstract:This research is focused on the experimental measurement of the thermal conductivity of CF 3 I and the subsequent development of empirical models, which are integral to engineering system design calculations. CF 3 I is identified as a potential key component in the formulation of future refrigerant mixtures, owing to its non-explosive nature, low toxicity, and minimal contribution to ozone layer depletion and global warming. Its applicability is further reinforced by its advantageous thermodynamic properties, including a low boiling point and a high critical temperature, making it a vital constituent in refrigerant mixtures. The study employs the well-established transient hot-wire method to measure the thermal conductivity of CF 3 I in both its liquid and vapor phases. This method is characterized by the sequential arrangement of two platinum wires which are linked in parallel to nullify any impacts from axial heat conduction. Experimental data were methodically gathered across a range of temperatures, spanning from 311 K to 374 K for the liquid phase and from 312 K to 394 K for the vapor phase, under varying pressures from 1.5 MPa to 4.0 MPa and 0.5 MPa to 3.0 MPa, respectively. The combined uncertainties associated with these measurements were meticulously calculated, amounting to 1.8% for the liquid phase and 2.0% for the vapor phase. Furthermore, the research advanced to the development of thermal conductivity models for CF 3 I, employing both the Extended Corresponding States method and the modified Residual Entropy Scaling method. These models effectively encapsulate the empirical findings, fitting within the established uncertainty limits with reasonable extrapolating behavior. Critically, these models are expected to play a pivotal role in predicting the thermal conductivity of refrigerant mixtures that incorporate CF 3 I as a component, marking a significant contribution to the field of refrigerant technology.

Analysis of the Insulation Characteristics of CF3I Mixtures with CF4, CO2, N2, O2and Air

Analysis of Gaseous By-Products of CF3I and CF3I-CO2 after High Voltage Arcing Using a GCMS

Numerical Modelling of Positive Surface Discharges in C-C<sub>4</sub>F<sub>8</sub>/CF<sub>3</sub>I/N<sub>2</sub> Gas Mixture under Non-Uniform Field

Numerical Modelling of Positive Surface Discharges in C-C4F8/CF3I/N2 Gas Mixture under Non-Uniform Field

A comparative investigation on the inhibition effects of CF3I/C3F6 on combustion of 1,1-Difluoroethane mixtures

Adsorption mechanism and compatibility of environmentally friendly insulating gas CF3I and its main decomposition products with Al and Cu(1 1 1) surfaces

Thermodynamic properties of trifluoroiodomethane (CF3I)

Measurement and Empirical Models of Thermal Conductivity of Trifluoroiodomethane (CF3I)

Thermodynamic Properties of Trifluoroiodomethane (CF 1 3I) 1

Theoretical Investigation of Mono- and Di-Chloro-Substitient Effects on the Insulation and Greenhouse Properties of Octafluorocyclobutane.

Numerical Simulation of the Discharge Dynamics of C₄F₇N-N₂ and the Influence of Buffer Gas

Heat Transfer Analysis of Different Conditions for SF$_{6}$/N$_2$ Gas-Insulated Transmission Lines

Thermal Conductivity of Gaseous Trifluoroiodomethane (CF3I)

Mechanism of O$_2$ influence on the decomposition process of the eco-friendly gas insulating medium C$_4$F$_7$N/CO$_2$

A new gaseous equation of state and transport properties of trifluoroiodomethane

Fluid modeling of CF3I/CO2 arc formation process

Theoretical Study of the Compatibility between Environmentally Friendly Insulation Gas CF3SO2F and Silver, Zinc, and Zinc Oxide Materials in Gas-Insulated Equipment

Theoretical and Experimental Study on a Compound Insulation System for High Temperature Applications

Surface Charging Characteristics of GIL Model Spacers under DC Stress in C4F7N/CO2 Gas Mixture

Physicochemical properties of CF 3 OCF=CF 2 in high-voltage switchgear: part 1. Decomposition characteristics and thermodynamic parameters

Investigation on Insulation strength and molecular structure of gas molecules based on DFT