Abstract:Purpose Gas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF 6 ), to enable a higher dielectric strength compared to e.g. air. However, under high voltage direct current conditions, charge accumulation and electric field stress may occur, which may lead to partial discharge or system failure. Therefore, numerical simulations are used to design the system and determine the electric field and charge distribution. Although the gas conduction shows a more complex current–voltage characteristic compared to solid insulation, the electric conductivity of the SF 6 gas is set as constant in most works. The purpose of this study is to investigate different approaches to address the conduction in the gas properly for numerical simulations. Design/methodology/approach In this work, two approaches are investigated to address the conduction in the insulating gas and are compared to each other. One method is an ion-drift-diffusion model, where the conduction in the gas is described by the ion motion in the SF 6 gas. However, this method is computationally expensive. Alternatively, a less complex approach is an electro-thermal model with the application of an electric conductivity model for the SF 6 gas. Measurements show that the electric conductivity in the SF 6 gas has a nonlinear dependency on temperature, electric field and gas pressure. From these measurements, an electric conductivity model was developed. Both methods are compared by simulation results, where different parameters and conditions are considered, to investigate the potential of the electric conductivity model as a computationally less expensive alternative. Findings The simulation results of both simulation approaches show similar results, proving the electric conductivity for the SF 6 gas as a valid alternative. Using the electro-thermal model approach with the application of the electric conductivity model enables a solution time up to six times faster compared to the ion-drift-diffusion model. The application of the model allows to examine the influence of different parameters such as temperature and gas pressure on the electric field distribution in the GIL, whereas the ion-drift-diffusion model enables to investigate the distribution of homo- and heteropolar charges in the insulation gas. Originality/value This work presents numerical simulation models for high voltage direct current GIL, where the conduction in the SF 6 gas is described more precisely compared to a definition of a constant electric conductivity value for the insulation gas. The electric conductivity model for the SF 6 gas allows for consideration of the current–voltage characteristics of the gas, is computationally less expensive compared to an ion-drift diffusion model and needs considerably less solution time.

Conceptual Design and Feasibility Study of Flexible Gas-Insulated Transmission Line Using CF3I Gas Mixture

Study of Surface Flashover and Breakdown Characteristics in Liquid Nitrogen for Sfcl Application

Dielectric Design and Test of 1200 kV Semi-Flexible SF6 Insulated Transmission Line

Technical aspects of gas insulated transmission lines and application of new insulating gases

Investigation on Dielectric Insulation Properties of ±525 Kv HVDC XLPE Material for High Temperatures Applications

Research progress on environmental-friendly insulating gases for HVDC gas-insulated transmission lines

Design and Test of 2250 Kvsemi-Flexible Sf6 Insulated High Voltage Pulse Transmission Line

Design of a ±320 Kv DC GIL

Advanced Dielectrics for Gas-Insulated Transmission Lines [Editorial]

Insulation design and on-site testing method for a long distance, gas insulated transmission line (GIL)

Heat Transfer Analysis of Different Conditions for SF$_{6}$/N$_2$ Gas-Insulated Transmission Lines

Lightning Protection of 500-kV DC Gas-Insulated Lines (GIL) With Integrated Surge Arresters

Gas-insulated transmission lines state classification and fault chamber location based on the divergence characteristics of temperature parameters

Research Status and Prospect of Gas-insulated Metal Enclosed Transmission Line

Seismic Performance Evaluation and Retrofit Strategy of Overhead Gas-Insulated Transmission Lines

Insulation co-ordination for gas-insulated transmission lines (GIL)

Analysis of Gaseous By-Products of CF3I and CF3I-CO2 after High Voltage Arcing Using a GCMS

Movable Membrane-Based Separation System with High SF6 Retention for Large-Scale Gas-Insulated Transmission Lines During Maintenance

The Development of SF6 Green Substitute Gas

Intrinsic Hetero-Polar Surface Charge Phenomenon in Environmental Friendly C3F7CN/CO2 Gas Mixture

Comparison of simulations of the gas conduction in HVDC GIL by application of nonlinear conductivity model and ion-drift-diffusion model