Abstract:Robust high-performance hollow fiber membranes are needed for sour natural gas separation. In this study, a semi-rigid, cross-linkable, defect-free 6FDA-based polyimide hollow fiber membrane was developed and evaluated under pure H2S and three realistic sour natural gas feeds. No cross-linking-induced decline of H2S permeance was observed, indicating that the delicate asymmetric nanostructures of hollow fibers were well preserved during the cross-linking process due to the rigid molecular structure. For sour natural gas feed with low H2S concentration (0.5% H2S, 20% CO2, 79.5% CH4), the cross-linked hollow fiber membrane exhibited H2S permeance and H2S/CH4 permselectivity as high as 32 GPU and 30, respectively, at 450 psi and 35 °C. The CO2 permeance and CO2/CH4 permselectivity were also well maintained with values of 35 GPU and 32, respectively. Under more aggressive sour natural gas feeds (25% H2S, 5% CO2, 70% CH4 and 20% H2S, 20% CO2, 60% CH4), plasticization was observed for uncross-linked CF3 hollow fiber, but this phenomenon actually was beneficial for H2S separation. Specifically, H2S permeance and H2S/CH4 selectivity increased somewhat for the uncross-linked vs the cross-linked sample. In addition, the effects of sour gas composition on the performance of hollow fiber membranes were also considered. The results suggest increased H2S concentration in sour natural gas exhibits more pronounced effects on both H2S and CO2 permeance and selectivity than does increased CO2 concentration in the feed. Considering the impressive H2S and CO2 separation performance as well as the robustness of hollow fibers under highly aggressive sour natural gases, our work shows promising potential to simultaneously remove acid gases from sour natural gas with energy-efficient membrane processes under challenging feed conditions.

Movable Membrane-Based Separation System with High SF6 Retention for Large-Scale Gas-Insulated Transmission Lines During Maintenance

Fabrication of Defect-Free Matrimid® Asymmetric Membranes and the Elevated Temperature Application for N2/SF6 Separation

Optimal Design of Hybrid Cryogenic Flash and Membrane System

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Study of Surface Flashover and Breakdown Characteristics in Liquid Nitrogen for Sfcl Application

Process optimization of CO2membrane and cryogenic hybrid separation

From pore to process: ultra-efficient SF6/N2 continuous separation using inexpensive robust MOF composites

Integrated design of multi-stage membrane separation for landfill gas with uncertain feed

Conceptual Design and Feasibility Study of Flexible Gas-Insulated Transmission Line Using CF3I Gas Mixture

Insulation design of -800 kV gas insulation transmission line for negative ion based neutral beam injector

Separation of perfluorinated electron specialty gases on microporous carbon adsorbents with record selectivity

Parametric Study of a Novel Cryogenic-Membrane Hybrid System for Efficient CO2 Separation

Development of a Portable SF6/N2 Mixed Gas Charging Device for On-Site Modification of Gas Insulated Current Transformer

The Development of SF6 Green Substitute Gas

Design of a ±320 Kv DC GIL

Research progress on environmental-friendly insulating gases for HVDC gas-insulated transmission lines

Design of a highly-stable cobalt (II) porous framework based on aromatic stacking strategy for efficient SF6 capture and SF6/N2 mixture separation

Intensification of CO2 Separation Performance Via Cryogenic and Membrane Hybrid Process — Comparison of Polyimide and Polysulfone Hollow Fiber Membrane

Dielectric Design and Test of 1200 kV Semi-Flexible SF6 Insulated Transmission Line

Cross-Linkable Semi-Rigid 6FDA-Based Polyimide Hollow Fiber Membranes for Sour Natural Gas Purification

Gas-insulated transmission lines state classification and fault chamber location based on the divergence characteristics of temperature parameters