Abstract:The conversion of nitric oxide by dielectric barrier discharge (DBD) in different reaction gases (O2, H2O, Ar, and N2) was studied. In the N2/O2 system, N and O could react to form NO; consecutively, extra O would oxidize NO to form NO2. Increase of oxygen content would promote the generation of NO, and the highest concentration of NO2 could be obtained with different oxygen contents at specific energy inputs (SEIs) of 1200 or 1440 J/L. In the N2/O2/NO system, the oxidation and reduction of NO took place simultaneously to form NO2 and N2, and NO was mainly removed by reduction when the oxygen content was lower than 6 vol %. In comparison, in the Ar/O2/NO system, NO was mainly oxidized to NO2. However, when the oxygen content exceeded 12 vol %, the increase of the SEI between 960 and 1440 J/L will increase the temperature of the DBD reactor, resulting in the restrain of the NO oxidation rate. In the SO2/N2/O2/NO system, SO2 could be oxidized by O radicals in the discharge region, leading to the restrain of NOx generation. In the H2O/N2/O2/NO system, H2O could promote the oxidation of NO so that NO conversion could reach 100% at 18 vol % O2 content. In the system of particulate matter/N2/O2/NO, particles would change the parameters in the discharge region and promote the production of N and O radicals, leading to the concentrations of NO2 and NOx being higher than those in the N2/O2/NO system. When the oxygen content was lower than 6 vol %, the conversion of NO reached 100% at 960 J/L. N2O formed in all systems as a byproduct of NO conversion by DBD. With the increase of the SEI, part of N was oxidized, resulting in the increase of NOx in all the systems containing N2.This article has not yet been cited by other publications.

Study of Effect of Material on Production of Nitric Oxide by Pulsed Discharge

Production of Medically Useful Nitric Monoxide Using AC Arc Discharge

Streamer Corona Plasmas and the Chemical Effects on NO Removal

Discharge Electrode Configuration Effects on the Performance of a Plasma Sparker

THE HIGH VOLTAGE PULSED CORONA APPROACH FOR THE TREATMENT OF NOx

Detection and removal of impurities in nitric oxide generated from air by pulsed electrical discharge

The influence of surface oxides on the distribution and release of nickel from Nitinol wires

Enhancing nitrogen fixation efficiency in glow-like discharge by reducing cathode-fall voltage

High efficiency NO x synthesis and regulation using dielectric barrier discharge in the needle array packed bed reactor

Experimental Study of NO2 Reduction in N2/Ar and O2/Ar Mixtures by Pulsed Corona Discharge.

Effect of packed quartz pellets on DBD plasma treating with NO

Effect of Gas Components and Particulate Matter on the Conversion of Nitric Oxide by Dielectric Barrier Discharge

Effect of Electric Potentials on Microstructure, Corrosion and Wear Characteristic of the Nitrided Layer Prepared on 2cr13 Stainless Steel by Plasma Nitriding

Effects of Electrode Structure and Electron Energy on Abatement of NO in Dielectric Barrier Discharge Reactor

TEST STUDY ON INFLUENCE OF ELECTRODES' ALLOCATION IN A REACTOR UPON OXIDIZING PROCESS OF NO CORONA

Influence of Outer Diameter of Electrode's Nozzle on Oxidation of NO by Corona Discharge

PLIF Diagnostics of NO Oxidization and OH Consumption in Pulsed Corona Discharge

Energy Consumption Analysis and OH Radical Detection of NO Conversion Process from Flue Gas Using Pulsed Corona Discharge

[Diagnosis of Electron Energy and Comparative Effects of OH, O or O3 on NO Oxidation in Pulsed Corona Discharge].

Nitrogen fixation by rotational gliding arc plasma at surrounding conditions

Biodegradable Charge-Reversal Pei Derivative for Gene Transfection