Abstract:The 16N monitoring system operates in a mixed neutron-gamma radiation field and is subject to high background radiation, thus triggering instability in the 16N monitoring system measurement data. Due to its property of actual physical process simulation, the Monte Carlo method was adopted to establish the model of the 16N monitoring system and design a structure-functionally integrated shield to realize neutron-gamma mixed radiation shielding. First, the optimal shielding layer with a thickness of 4 cm was determined in this working environment, which had a significant shielding effect on the background radiation and improved the measurement of the characteristic energy spectrum and the shielding effect on neutrons was better than gamma shielding with the increase in the shield thickness. Then, functional fillers such as B, Gd, W, and Pb were added to the matrix to compare the shielding rates of three matrix materials of polyethylene, epoxy resin, and 6061 aluminum alloy at 1 MeV neutron and gamma energy. The shielding performance of epoxy resin as the matrix material was better than that of the aluminum alloy and polyethylene, and the shielding rate of boron-containing epoxy resin was 44.8%. The γ-ray mass attenuation coefficients of lead and tungsten in the three matrix materials were simulated to determine the best material for the gamma shielding performance. Finally, the optimal materials for neutron shielding and gamma shielding were combined, and the shielding performance of single-layer shielding and double-layer shielding in mixed radiation field was compared. The optimal shielding material-boron-containing epoxy resin was determined as the shielding layer of the 16N monitoring system to realize the integration of structure and function, which provides a theoretical basis for the selection of shielding materials in a special working environment.

Study on Optimization Design of Compact and Lightweight Radiation Shielding Material for Vehicle-mounted Accelerator-driven D-D Neutron Source

Optimization design for moderator, reflector, and shielding of Deuterium-Deuterium neutron source

Compact shielding and irradiator design of a 252Cf neutron source

Optimization Study on Shielding Design for Horizontal Ducts of China Advanced Research Reactor

Monte Carlo simulation and optimization of neutron ray shielding performance of related materials

Shielding Capability Research on Composite Base Materials in Hybrid Neutron-Gamma Mixed Radiation Fields

Study of a High Temperature–Resistant Shielding Material for the Shielding Doors of Nuclear Power Plants

New Cf-252 neutron source shielding design based Monte Carlo simulation using material combination

Partial anomalous pulmonary venous drainage in a patient with Turner's syndrome.

Simulating Radiation Shielding Effectiveness Against Three Neutron Sources

Lightweight and heat resistant resin-based composite neutron shielding material

RADIATION PROTECTION CALCULATION AND OPTIMIZATION FOR SHIELDING DESIGN AROUND THE REFUELING PIPELINES OF HTR-PM

Mass Optimization of a Multilayered Shield for Transportable Microreactors

Development of a Radiation Shielding Monte Carlo Code: RShieldMC

Shielding optimization to reduce the radiation field in the accelerator systems of IFMIF-DONES

Design and implementation of the monochromator shielding for the cold neutron spectrometers XINGZHI and BOYA

EFFICIENCY OF VARIOUS MATERIALS APPLICATION FOR RADIATION SHIELDING AT TRANSPORTATION AND STORAGE OF SPENT NUCLEAR FUEL BY DRY METHOD

Design and mechanical properties of SiC reinforced Gd2O3/6061Al neutron shielding composites

Designing a boron nitride polyethylene composite for shielding neutrons

Optimization of pure elemental and oxide-based shielding materials for cost

Radiation transport calculations for the European Spallation Source accelerator environment