Abstract:The spherical fuel elements are adopted in the high-temperature gas-cooled reactor pebble-module (HTR-PM). The fuel elements will be discharged continuously from the reactor core and transported into the fuel transport pipelines during the reactor operation, leading to spatially varying dose outside the pipeline. In this case, the dose evaluation faces two major challenges, including dynamic source terms and pipelines with varying lengths and shapes. This study tries to handle these challenges for HTR-PM through comprehensive calculations using the QAD-CGA program and to design the corresponding shielding of the pipeline. During the calculation, it is assumed that a spherical fuel element stays in different positions of the pipelines in turn, and the corresponding dose contributions were calculated. By integrating the dose contributions at different positions, the dose at the points of interest can be obtained. The total dose is further determined according to the assumed fuel elements transport speed of 5 m/s and total 6000 fuel elements transportation per day. Two types of fuel transport pipelines and two source terms were considered, i.e., the spent fuel element transport pipelines with corresponding spent fuel source term and the different burn-up fuel element transport pipelines with the average burn-up fuel source term. Doses at different points of interest were calculated with no shielding scenario and with lead shielding of different thicknesses scenario. To evaluate the shielding effect, the dose limit of the orange radiation zone of HTR-PM and the radiation damage thresholds from NCRP report No.51 were both adopted. The calculated results show that, for pipelines that transport the spent fuel, a 4 cm lead shielding will be enough. And for pipelines that transport fuel elements with different burn-up, a 5 cm lead shielding will be added. The method and results can provide valuable reference for other work of HTR-PM.

EFFICIENCY OF VARIOUS MATERIALS APPLICATION FOR RADIATION SHIELDING AT TRANSPORTATION AND STORAGE OF SPENT NUCLEAR FUEL BY DRY METHOD

Modelling of radiation field around spent fuel container

Neutron shielding effects of spent fuel tank of high temperature reactor

RADIATION SAFETY EVALUATION OF A TRANSPORT CONTAINER DURING CARTING SPENT NITRIDE URANIUM-PLUTONIUM FUEL OF BN-600 USING THE MCU-FR CODE

Neutron radiation characteristics of the IVth generation reactor spent fuel

Research on fission and fusion neutron shielding performance of various materials

The Advancement of Neutron-Shielding Materials for the Transportation and Storage of Spent Nuclear Fuel

RADIATION PROTECTION CALCULATION AND OPTIMIZATION FOR SHIELDING DESIGN AROUND THE REFUELING PIPELINES OF HTR-PM

New Cf-252 neutron source shielding design based Monte Carlo simulation using material combination

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Radiobiological Impact Evaluation Within Monte-Carlo Shielding Calculations of CANDU Spent Fuel

Simulating Radiation Shielding Effectiveness Against Three Neutron Sources

ShieldingDesignandDoseEvaluation forHTR-PMFuelTransport Pipelines by QAD-CGA Program

The Advancement of Neutron Shielding Materials for the Storage of Spent Nuclear Fuel

Shielding Design and Dose Evaluation for HTR-PM Fuel Transport Pipelines by QAD-CGA Program

Evaluation of Candidate Materials for SCWR Turbine and Balance of Plant Shielding

Radiation transport calculations for the European Spallation Source accelerator environment

Modeling Particle Fluxes and Absorbed Dose for Protection from Cosmic Rays Using the SHIELD Transport Code

Compact shielding and irradiator design of a 252Cf neutron source

Study on Optimization Design of Compact and Lightweight Radiation Shielding Material for Vehicle-mounted Accelerator-driven D-D Neutron Source