Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Temperature Field Numerical Simulation of Integrative Cold Sodium Pool and Auxiliary System of CEFR

Numerical Simulation of Primary Side for Intermediate Heat Exchanger in CEFR

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Numerical simulation of the temperature field in the ITER Chinese helium cooled solid breeder test blanket module

Dimensional comparable numerical analysis of the thermal stratification in the lead-cooled experimental facility CLEAR-S

A CFD-based simulation of fluid flow and heat transfer in the Intermediate Heat Exchanger of sodium-cooled fast reactor

Numerical Simulation for Conjugated Problems of Conduction, Convection and Radiation in an Annular Space

Testing and Numerical Simulation of Temperature Field and Oxygen Field for CFB Boilers

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor

of Smart Grid and Clean Energy Simulation analysis of a passive containment cooling system based on the RELAP 5 program

Simulatiomn of BHE fresh air air conditioning system based on TRNSYS-CFD Hybrid Simulation

Numerical Study of Natural Draft Wet Cooling Tower

Numerical Simulations of the Temperature Field in the Breeding Sub-Module of the ITER Chinese Helium Cooled Solid Breeder Test Blanket Module

Thermal-Hydraulic Analysis For Experimental Device Of Supercritical Water Reactor-Fuel Qualification Test

Study on Unsymmetrical Operating Condition of CEFR

CFD Calculation of Natural Convection Heat Transmission in a Three-Dimensional Pool with Hemispherical Lower Head

Test and numerical simulation of multiphase dynamics in utility boiler with concentric firing system

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

Numerical Simulation and Investigation on Natural Circulation Cooling Transient Process for Spent Fuel Assembly in Sodium-cooled Fast Reactor

The Design and CFD Simulation of a New Spent Fuel Pool Passive Cooling System

Three-Dimensional Numerical Simulation of Temperature Field and Helium Flow Field in ITER China TBM