Abstract:The Supercritical Carbon Dioxide (S-CO 2 ) cOoled Lithium-Lead (COOL) blanket is under development for Chinese Fusion Engineering and Test Reactor. The thermal hydraulic assessment plays an important role for the comprehensive performance evaluation on the fusion blanket among the multi-physics fields. As the fusion reactor will enter into the engineering construction stage, it is important to study the thermal hydraulics performance on basis of the full model. Because it can accurately check the heat removal capability and thermoelectricity conversion efficiency, as well as provide essential input for the other physical fields. In this demand-driven, the analyses and optimization on the cooling system are put into priority on basis of the full banana model, including the manifold design and inlet/outlet pipes locations. Finally, the coolant pressure drop is highly reduced and the mass flow distribution becomes much more uniformly. For the S-CO 2 , 82.3% of the total mass flow rate is distributed into the key component first wall, and this is beneficial to face the high radiation heat flux. Besides, under different level of heat flux, the required total mass flow rate and pressure drop are obtained on premise that the coolant has enough ability to safely remove the heat away. For the Lead–Lithium (PbLi), the distribution of mass flow rate is designed as 'ladder' shape to adapt the unevenly spatial distributed nuclear heat along the radial direction, and the ratio is 8:2:1. Furthermore, the first law of thermodynamics is adopted for the trade-off analysis, which converts the total pressure drop of the two coolants into the pumping power, and it occupies only 1.3% of the total thermal power. This provides accurate and valuable data for the primary and secondary loop design, as well as the economic assessment on the fusion reactor. Finally, the Two Dimensional thermal hydraulic model containing the detailed layouts of different materials is used to study the coupling heat transfer effects between PbLi and S-CO 2 , as well as the MagnetoHydroDynamics (MHD) effects. The boundary conditions are derived from the results of full banana model, and the results show that the temperature of all materials is not exceeding the upper limits.

Three-Dimensional Numerical Simulation of Temperature Field and Helium Flow Field in ITER China TBM

Numerical simulation of the temperature field in the ITER Chinese helium cooled solid breeder test blanket module

Numerical Simulations of the Temperature Field in the Breeding Sub-Module of the ITER Chinese Helium Cooled Solid Breeder Test Blanket Module

Current Progress of Chinese HCCB TBM Program

DNS of MHD Turbulent Flow Via the HELIOS Supercomputer System at IFERC-CSC

DNS of Turbulent Heat Transfer in Pipe Flow Via the HELIOS Supercomputer System at IFERC-CSC

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Transient Analysis on Helium Coolant Tube Break Accident of Dual-Functional Lithium Lead Test Blanket Module

CFD Simulation of Pressure Wave Propagation in the Helium Coolant Tube Break Accident of DFLL-TBM

A Three-Dimensional Fictitious Domain Method for Direct Numerical Simulations of Particle-Laden Flows with Heat Transfer

Analysis and Optimization of Cooling Channels in ITER Blanket Module

Design and construction of a helium cooling experimental loop

Modification on the contact model of LiPb and noncondensable gas in RELAP/SCDAPSIM/MOD4.0 and application to LOCA of China DFLL-TBM

CFD Simulation of Thermoacoustic Oscillations in Liquid Helium Cryogenic System

Numerical simulation on coolant flow and heat transfer in core

Three-dimensional Numerical Study on Thermal Performance of a Super Large Natural Draft Cooling Tower of 220m Height

Thermal hydraulic assessment on the full banana model of COOL blanket for CFETR

Numerical Simulation of Flow Field in Hot Gas Chamber of High-Temperature Gas-Cooled Reactor

Computational Thermal-Fluid Dynamics analyses of borated water distribution in the Vacuum Vessel of the Divertor Tokamak Test facility

An integral methodological framework for the thermo-mechanical analysis and structural integrity assessment of the European TBM sets

Numerical Investigations of Thermal Mixing Performance of a Hot Gas Mixing Structure in High-Temperature Gas-Cooled Reactor