Abstract:Performing partial discharge (PD) detection under DC voltage can help to find out insulation defects of the high-voltage direct current (HVDC) cable systems. Partial discharges highly depend on the field strength at the defect, which is determined by the dielectric conductivity under DC voltage. As is known the polymer conductivity is significantly influenced by electric field strength and temperature, and over the cable working temperature range the conductivity of cable insulation material could change by orders of magnitude. This phenomenon will result in locally enhanced electric field distortion when there is a defect inside the cable insulation. And it will have some influences on the detection of partial discharge. To investigate the field distortion caused by the field and temperature dependent insulation conductivity and its influences on the partial discharge under DC, a sandwich model with an internal cylindrical cavity is established using finite element method (FEM). The electric field distribution in the crosslinked polyethylene (XLPE) sandwich sample is calculated with existence of an internal air-filled cavity. And the results are compared with and without the consideration of the field and temperature dependent material characteristics. The caculation results show that at ambient temperature, the electric field in the cavity is enhanced by considering of the field dependence of conductivity. And at the maximum working temperature, the field distribution at the cavity is dominated by temperature. In addition, sandwich cavity samples are made using cable insulation slices from the commercial 320 kV HVDC cable. Partial discharge tests under positive DC voltage are conducted to verify the calculations.

Comparative Study on Partial Discharge Characteristics of XLPE Cable under Damped Oscillating Wave Voltage and AC Voltage

Study on Characteristics of Partial Discharge in Xlpe Cable under Damped Ac Voltage at Different Frequencies

A Comparative Study on Partial Discharge Characteristics for XLPE Cable.

Characteristics of Partial Discharge in Cross-Linked Polyethylene Insulation Cable under Damped Ac Voltage

Measurement and analysis of partial discharge in XLPE power cable based on ultrasonic

Investigation on Thermal Aging and Degradation of XLPE for High Voltage Cable Applications

Test Research on DC Partial Discharges of Cross Linked Polyethylene Cable

Partial Discharge Characteristics in the Course of Aging Within XLPE Insulation

The Relationship Between Partial Discharge Behavior and the Degradation of 10 Kv Xlpe Cable Joints

Study on Partial Discharge Characteristic in XLPE Accessory Based on Pulse Sequence Analysis

Studies on electric field distribution and partial discharges of XLPE cable at DC voltage

Partial Discharge Detection on 320 Kv VSC-HVDC XLPE Cable with Artificial Defects under DC Voltage

Simulation and Partial Discharge Detection for Typical Defects of 10 Kv Cable the Joint

Typical Defect Simulation of 110kv Cable and Its Partial Discharge Characteristic Test

Study on the partial discharge characteristics of the XLPE insulation samples during electrical treeing ageing

Research on the Discharge Characteristics of XLPE Insulated DC Cables

Modelling of Enhancement of Electric Field and Temperature on Partial Discharge in the XLPE Cavity Model under Positive DC Voltage

Dielectric loss and partial discharge test analysis of 10 kV XLPE cable

Simulation Of Partial Discharge Propagation Characteristics In Xlpe Cables And Joints

Experimental Study on Partial Discharge in XLPE Insulation During Electrical Aging

Investigation of partial discharge characteristics in XLPE cable insulation under increasing electrical stress