The Controller of Stepper Motor Based on Special Integrated Circuits

林波,李兴根

DOI: https://doi.org/10.3969/j.issn.1001-6848.2000.03.005

2000-01-01

Abstract:The design of stepper motor controller applying the special integrated circuits is introduced.Including the construction of main control circuits, synchronization improvements and parallel drivers. It is proved that the method is simple and practical by experiments.

What problem does this paper attempt to address?

A Control Method of Stepping Motor Based on Counter/timer

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.02.026

2004-01-01

Abstract:In the numerical control system it is often demanded we can turn results of interpolation into numerical impulses to stepping motor。This paper introduces the counter/timer 8254 and discusses the design method of running speed、step number and direction of the stepping motor with 8254.
Program Design and Application of Stepping Motor Driven by Parallel Printer Interface

宫闽军,商俊敏,宋立军,吴乘波,徐志农,周晓军

DOI: https://doi.org/10.3969/j.issn.1001-2265.2004.06.023

2004-01-01

Abstract:This article introduces a convenience and feasible system that can take advantage of program to control the I/O of parallel printer interface to drive the stepping motors and that is applied in the experiment device of detection. In order to drive the stepping motors, this system makes use of the data-output ports of parallel printer interface that have the flip-latch function to transmit required-frequency pulse by controlling parallel printer interface's I/O.
Design of Stepper Motor Subdivision Control System Based on ARM

XU Zu-hua,XIAO Zhi-hua,SU Ze-guang

2006-01-01

Abstract:A stepper motor subdivision control system has been designed in this paper,which is based on ARM7 chip LPC2214 and the LMD18245 electrical machinery special-purpose driver chip.The "linear + sine" wave driver method and the electric current vector constant breadth algorithm is used in this system.The digital wave data is generated by ARM controller,which is converted to corresponding control voltage.The voltage is enlarged by driver chip LMD18245 to drive the two-phase stepper motor.The control sign is input by the keyboard,and the frequency and the subdivided multiple are displayed by liquid crystal.The software based on uCLinux and MiniGUI platform is designed.Multi-purpose control of the stepper motor and 4096 subdivision multiple are realized in the system.
Design of Stepper Motor Control System Based on Sine-subdivide Drive

ZHANG Xin-rong

DOI: https://doi.org/10.3969/j.issn.1001-1390.2010.08.018

2010-01-01

Abstract:The paper integrated stepper motor with AT89C51 monolithic circuit closely,through the programming method of the stepper motor by sine-subdivide drive,such as reverse and speed control,causes it to move under certain scope,also facilitate controls nimbly stepper motor's running status,realizes the tradition to stepper motor to automate highly.The software design process through software Proteus ISIS code simulation and functional verification of the theory,and finally through the hardware debugging code to verify the actual function,completion of the controller design.The system can run reliably in practice.
The Design of the Controller for Vehicle Brush-less DC Motor Based on LIN Bus

Qin Guoping,Yao Wei,Zhang Wei

DOI: https://doi.org/10.3321/j.issn:1000-680X.2006.06.018

2006-01-01

Abstract:The controller for a brush-less DC motor based on LIN bus is developed with the overall structure and the implementation of hardware and software described in detail.The test results show that the controller is stable,reliable,meeting the design requirements.
Design and Research of MCU-based Control System for Stepper Motor

YU Shi-chao,GAO Zhi,SHAO Peng

DOI: https://doi.org/10.3969/j.issn.1003-0794.2010.05.088

2010-01-01

Abstract:The work characteristics of stepper motors briefly are analyzed,and provide a practical solution for the digital control of stepper motors based on single-chip microcomputer.This control system takes full advantage of integrated circuit(IC) relative to traditional control circuit,and simplifies the control circuit while receive the same control function.The system is easy to operate.The position of stepper motor can be controlled accurately based with the visualization and real-time features.At the same time,the users can operate the stepper motors online.
Design of PWM Constant Current Division Drive Circuit of Stepper Motor

叶树明,李顶立

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.12.006

2004-01-01

Abstract:Through the reasonable selection of division electric current waveform of phase winding for stepper motor and motor drive IC, it presents and introduces the motor drive scheme of constant current and division based on microcomputer and the relative technique. As the experiential results show, systemic performance of stepping motor starting and operation in high or low frequency are improved.
Design of a Three-Phase Hybrid Stepping Motor Pulse Subdivision Controller Based on DSP

Gangfeng Yan

2007-01-01

Abstract:Hybrid stepping motor is similar to permanent magnet synchronous motor in functional principle,therefore,it can be controlled by the advanced control technology of permanent magnet synchronous motor.A new control method is obtained from control at aspect of synchronous motor instead of control of phase currency.A three-phase hybrid stepping motor pulse subdivision controller based on TMS320LF2407 DSP is designed based on this theory.
The Intelligent Controlling System for Stepper Motor with Micro-Torque

李为民,胡红专,户玉展,俞巧云,翟超,邓伟平,邢晓正

DOI: https://doi.org/10.3969/j.issn.1001-2257.2003.06.009

2003-01-01

Abstract:The intelligent controlling system is designed to control to the twophase stepper motor with microtorque.The data port of microprocessor composes the intelligent pulse generator and the pulse distributor of stepper motor.The flexibility of the controlling system is improved.The bridgemode driver circuit based on TPA1517 (a hifi audio power amplifier) is analyzed.The operational control mode of the motor is present.
Design of the Control System of Stepping Motor Based on SPCE061A

ZHANG Yong-de,LI Peng

2009-01-01

Abstract:This paper designs an control system to control stepping motor by Sunplus SPCE061A and microcomputer.Using the host computer and the slave computer realizes the control of stepping motor running a variety of ways.The program adopts modular design to achieve every function through PC.This system realized the functions of speed control and direction control of the stepping motors.There are comprehensive functions,steady operation,high reliability and high cost-effectiveness in the system.
Digital controller for closed-loop drive of step motors

Heath, S.,G. A. J. Amaratunga,Acarnley, P.P.

DOI: https://doi.org/10.1049/el:19860788

1986-01-01

Electronics Letters

Abstract:A digital circuit for the closed-loop control of step motors based on motor position detection from input current waveforms is presented. The operation of the circuit is illustrated by application of the controller to a commercial variable reluctance type step motor. The circuit has been developed with the aim of integrated circuit implementation to obtain a viable closed-loop drive circuit for this type of motor.
Multi-motor Cooperative Control System Design Based on STM32

LI Hong-Yan,WEI Shi-Min,LIAO Qi-Zheng,GUO Lei

DOI: https://doi.org/10.3969/j.issn.1002-6673.2012.05.048

2012-01-01

Abstract:The STM32 is a kind of 32-bit flash microcontroller which developed by ARM Inc.,it's based on the Cortex-M3 core,and has characteristics of high-performance but with low power.This article describes a collaborative control method of stepper motors,which based on the STM32,it provides an implement of multiple stepper motors' speed control through nested vector interrupt method.This arti-cle also uses a closed-loop feedback control system to guarantee the motors' accuracy of action.
Design of Three-Phase Reaction Step Motor Intelligence Control System

ZHANG Xin-rong,CHANG Bo,XU Bao-guo

DOI: https://doi.org/10.3969/j.issn.1001-3997.2014.03.071

2014-01-01

Abstract:Three-phase reaction stepping motor speed and steering control system is designed based on single chip microcomputer.Input stepping motor pulse frequency adjusts to the stepping motor rotating one of fixed angle.The stepper motor speed is adjusted because of changing stepper angle by controlling the pulse frequency and time delay strategies.This scheme AT89C51 microcontroller timer internal changes CP pulse frequency and stepping motor speed control.Through theoretical and experimental research,the system realized the stepping motor speed and positive negative control functions.The stepping motor intelligence control system was in wide frequency range by changing pulse frequency regulating stepper motor speed and fast starting and stopping and positive negative control.
Design of Five-Phase Hybrid General-Purpose Stepping Motor Driver Based on MCU

刁红泉,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.02.011

2004-01-01

Abstract:Base on the analysis of the defects of present five-phase hybrid stepping motor drivers in computerised embroidery machine such as low frequency torque vibrations, high frequency inadequate torque output, multi power supplies and out of general-purpose, this paper designs a general-purpose stepping motor driver based on MCU. The new driver uses single power supply and three-phase excitation and gives PWM output. The design improves the stability in low frequency and the torque-frequency characteristic in high frequency. Even under the condition without impulse-subdivision, it can excite the motor of 2,3,4 phases. It has been applied in the computerised embroidery machine and has achieved a real good effect.
Design of Five-Phase Hybrid Stepping Motor Reformative Driver Based on MCU

刁红泉,胡伟雄,颜钢锋

DOI: https://doi.org/10.3785/j.issn.1006-754x.2004.01.005

2004-01-01

Journal of Engineering Design

Abstract:Stepping motor is the most popular executive component in high performance textile machinery, especially in the computerised embroidery machine. Five-phase hybrid stepping motor drivers in the computerised embroidery machine have a good many defects such as low frequency torque vibrations, high frequency inadequate torque output and multi power supplies. Combined with theoretical analysis, this paper gives a reformative driver based on analysis of present stepping motor drivers. This driver uses single power supply and three-phase excitation and gives PWM output. The design improves the stability in low frequency and the torque-frequency characteristic in high frequency and it has been applied in the computerised embroidery machine and has achieved a real good effect.
Research on An Integrated Stepping Motor Controller Based on FPGA

ZHU MIN,LI XIUHONG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.08.085

2008-01-01

Abstract:This paper presents a design scheme of a novel integrated stepping motor controller based on FPGA. The scheme adopts fuzzy self-organization PID adjustment to realize closed-loop control of stepping motor driving system, enhancing the self-adaptive performance of system. The controller and driver of stepping motor driving system are integrated on FPGA by use of the embedded PicoBlaze microprocessor of FPGA. System on a programmable chip is realized, and control performance is greatly improved.
Design of Control System of Stepper Motor Based on DSP

李为民,邢晓正,胡红专,邓伟平

DOI: https://doi.org/10.3969/j.issn.1004-7018.2001.03.009

2001-01-01

Abstract:This paper puts forward the application of DSP in the control system of stepper motor. Single DSP constitutes the intelligent controller of stepper motor. The data port of DSP forms the intelligent pulse distributor of stepper motor, and the control system creates drive pulse of stepper motors by the timer of DSP. The paper also presents the control principle of pulse scanning method of multi-object stepper motors based on single ADSP-2181. Each control unit controls four stepper motors, and has one I/O port address number of DSP. DSP drives stepper motors by scanning the I/O port address of each unit.
Design and Realization of Stepping Motor Drive System Controlled by Single-Chip Microcomputer

Cheng Deng,Erhui Bian,Zhishen Ge

DOI: https://doi.org/10.1007/s11277-022-09534-z

IF: 2.017

2022-02-07

Wireless Personal Communications

Abstract:In order to meet the needs of operation and management of multiple stepping motors in the current Internet of things environment, this paper designed the software and hardware of the stepping motor drive management system under the control of a single-chip microcomputer based on LabVIEW, which is a graphical programming platform developed by National Instruments Corporation of the United States, and tested and verified the functions of the system. The software part of the system transmitted data between the host computer and the driver terminal based on a service cloud platform called Easy-Control, realizing the network real-time online management operation function. In the hardware design, the existing functions of the STM32F407ZGT6 single-chip microcomputer were combined with the the design of the special driver chip LV8726TA to simplify the circuit design of hardware to increase system stability. The comparison demonstrated that the software and hardware of the system were developed on the LabVIEW platform, which had the advantages of high efficiency, short development cycle, low cost, and convenient function expansion. This work provides a scheme for the design and implementation of similar systems.

telecommunications
The Modelling, Simulation and FPGA-Based Implementation for Stepper Motor Wide Range Speed Closed-Loop Drive System Design

Chiu-Keng Lai,Jhang-Shan Ciou,Chia-Che Tsai

DOI: https://doi.org/10.3390/machines6040056

IF: 2.899

2018-11-01

Machines

Abstract:Owing to the benefits of programmable and parallel processing of field programmable gate arrays (FPGAs), they have been widely used for the realization of digital controllers and motor drive systems. Furthermore, they can be used to integrate several functions as an embedded system. In this paper, based on Matrix Laboratory (Matlab)/Simulink and the FPGA chip, we design and implement a stepper motor drive. Generally, motion control systems driven by a stepper motor can be in open-loop or closed-loop form, and pulse generators are used to generate a series of pulse commands, according to the desired acceleration/run/deceleration, in order to the drive system to rotate the motor. In this paper, the speed and position are designed in closed-loop control, and a vector control strategy is applied to the obtained rotor angle to regulate the phase current of the stepper motor to achieve the performance of operating it in low, medium, and high speed situations. The results of simulations and practical experiments based on the FPGA implemented control system are given to show the performances for wide range speed control.

engineering, mechanical, electrical & electronic
Study and implementation of SPWM microstepping controller for stepper motor

Ning-yi Ji,Wei-jian Shen,Han Liu,Tao Zhao

DOI: https://doi.org/10.1109/ICIEA.2018.8398093

2018-05-01

Abstract:Microstepping control for stepper motor is a well-known technique to improve stepper motor performance. In this paper, a digital controller for microstepping drive of stepper motor using Sinusoidal Pulse Width Modulation (SPWM) approach is proposed and the electromagnetic torque is compared to the conventional full-step methodology and the SPWM technique used for microstepping. The system has been simulated using Matlab/Simulink and the controller has been implemented using STM32F103 microcontroller. The paper presents the design, analysis, simulation and experimental results of SPWM based microstepping drive, and the simulation and experimental results depict the effectiveness of the controller.

Engineering,Computer Science

The Controller of Stepper Motor Based on Special Integrated Circuits

A Control Method of Stepping Motor Based on Counter/timer

Program Design and Application of Stepping Motor Driven by Parallel Printer Interface

Design of Stepper Motor Subdivision Control System Based on ARM

Design of Stepper Motor Control System Based on Sine-subdivide Drive

The Design of the Controller for Vehicle Brush-less DC Motor Based on LIN Bus

Design and Research of MCU-based Control System for Stepper Motor

Design of PWM Constant Current Division Drive Circuit of Stepper Motor

Design of a Three-Phase Hybrid Stepping Motor Pulse Subdivision Controller Based on DSP

The Intelligent Controlling System for Stepper Motor with Micro-Torque

Design of the Control System of Stepping Motor Based on SPCE061A

Digital controller for closed-loop drive of step motors

Multi-motor Cooperative Control System Design Based on STM32

Design of Three-Phase Reaction Step Motor Intelligence Control System

Design of Five-Phase Hybrid General-Purpose Stepping Motor Driver Based on MCU

Design of Five-Phase Hybrid Stepping Motor Reformative Driver Based on MCU

Research on An Integrated Stepping Motor Controller Based on FPGA

Design of Control System of Stepper Motor Based on DSP

Design and Realization of Stepping Motor Drive System Controlled by Single-Chip Microcomputer

The Modelling, Simulation and FPGA-Based Implementation for Stepper Motor Wide Range Speed Closed-Loop Drive System Design

Study and implementation of SPWM microstepping controller for stepper motor