Abstract:A numerical double-freeform-optical-surface design method is proposed for beam shaping applications. In this method, both the irradiance distribution and the wavefront of the output beam are taken into account. After numerically obtaining the input-output ray mapping based on Energy conservation using the variable separation method, the two freeform optical surfaces can be constructed simultaneously and point by point corresponding to the ray mapping based on Snell's law and the constancy of the optical path length. The method is only applicable for separable irradiance distributions. However, such a restriction is fulfilled by many practical laser beam shaping examples. Moreover, the restriction can simplify the computation considerably. Therefore, the method may be quite useful in practice, although it is not applicable to more general cases. As an example, the method was applied to design a two-plano-freeform-lens system for transforming a collimated 20 mm Gaussian laser beam (beam waist: 5mm) into a uniform 10 x 40 mm(2) rectangular one without changing the wavefront. Simulation results show that we can obtain a dual lens beam shaping system with the relative root mean square deviation of the irradiance ranging from 0.0652 to 0.326 and the power ratio concentrated on the desired region ranging from 97.5% to 88.3% as the output beam transfers from 0mm to 1000mm. (C)2013 Optical Society of America

Study on the Influence of the Shaping Elements of 2 kW Radio Frequency Slab CO2 Laser on Transmission Characteristics

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Beam-Shaping Application in Laser Heat Processing

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

New beam CO2 laser

Numerical Simulation and Experimental Investigation of Coaxiality Change of Laser Cladding Rotor Shaft

A New Beam Co2-Laser

Beam shaping system design using double freeform optical surfaces.

Study on characteristics of output beam of combined optical diode lasers

Design and Verification of a Flat-Top Beam Shaper Utilizing Spherical Lenses

Resonator design and beam quality measurement in Yb:YAG slab lasers

Study on the Influences of Thermal Lenses Spherical Aberration of Beam Quality

Progress in New Laser Beam on Optical Beam Quality

Study of singular radius and surface boundary constraints in refractive beam shaper design

Beam-shaping of Laser Diode Stack for Uniform Illumination by Cylindrical Micro-Lenses

Thermal Birefringence-Based beam shaping in high energy lasers