Abstract:Large-aperture and long focal-length lens is widely used in high energy laser system. The method based on Talbot interferometry is a reliable method to measure the focal length of such elements. By employing divergent beam and two gratings of different periods, this method could realize full-aperture measurement, higher accuracy and better repeatability. However, it does not take into account the spherical aberration of the measured lens resulting in the moire fringes bending, which will introduce measurement error. Furthermore, in long-focal measurement with divergent beam, this error is an important factor affecting the measurement accuracy. In this paper, we propose a new spherical aberration compensation method, which could significantly reduce the measurement error. Characterized by central-symmetric scanning window, the proposed method is based on the relationship between spherical aberration and the lens aperture. Angle data of moire fringes in each scanning window is retrieved by Fourier analysis and statistically fitted to estimate a globally optimum value for spherical-aberration-free focal length calculation. Simulation and experiment have been carried out. Compared to the previous work, the proposed method is able to reduce the relative measurement error by 50%. The effect of scanning window size and shift step length on the results is also discussed.

Study on the Influences of Thermal Lenses Spherical Aberration of Beam Quality

Influence of Spherical Aberrations on Fundamental Mode Beam Quality under Different Laser Resonators

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Influence of Spherical Aberration of the Thermal Lens on the Mode Profile of A Large-Volume Tem00-Mode Resonator

Theoretical Analysis of Thermal-Lensing Effect in a High Power Exciplex Pumped Cs Vapor Laser.

Influence of Spherical Aberrations on the Performance of Dynamically Stable Resonators

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Numerical Analysis of Thermal Response of Mid-Infrared High Reflectance Coating under Different Laser Irradiation Angles

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Influences of Spherical Aberration on Resonator's Stable Zones and Fundamental Mode Output Power Scaling of Solid State Laser Oscillators.

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Beam quality improvement by thermally induced aberrations in a diode-end-pumped laser amplifier

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Effect of unstable resonator stability on laser beam quality

Study on Thermal Effects of LD End-Pumped High-Repetition-rate Nd:YAG Laser

Determination of Thermal Lensing and Dynamic Operating Point of Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile: the Influence of ${\rm TEM}_{00}$ Beam Size

Effect of Spherical Aberration on the Propagation of A Tightly Focused Femtosecond Laser Pulse Inside Fused Silica

Numerical Modeling of the Thermal Lensing Effect in a Grazing-Incidence Laser

Numerical and Experimental Results of Wavefront Aberration Caused in a High Power Laser Amplifier