Abstract:We put forward a quasi-concentric laser resonator configuration employing a line-shaped end-pumping profile (QRLE). A thermal lensing modeling of the QRLE is developed, including the quartic phase deformation and the dependence of the thermal focal power on the TEM00 mode size at the thermal lens. Based on the calculation, we found that the dynamic operating point of the QRLE depends on both the resonator condition and the thermal effect condition. Furthermore, we predicted that the operating point in the subcritical region is insensitive to power fluctuation, i.e., the QRLE with extremely short cavity length is capable of stable operation. The validity of our prediction was well confirmed by theoretical modeling and experimental realization. Compared to conventional resonator designs, the QRLE resonator design produces the fundamental mode output with an LD bar instead of the fiber-coupled pump source and realizes good stability with short cavity length, demonstrating a clear advantage of both low cost and compactness. Based on the QRLE configuration, we produced > 12 W pulsed TEM00 output, with the repetition rate of 30 kHz and optical-optical efficiency of 27%. The laser output mode is elaborately symmetrized in two directions in terms of beam quality, waist radius, and waist position.

Determination of Thermal Lensing and Dynamic Operating Point of Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile: the Influence of ${\rm TEM}_{00}$ Beam Size

Theoretical Analysis of Thermal-Lensing Effect in a High Power Exciplex Pumped Cs Vapor Laser.

Tem00 Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile: Power-Insensitive Operating Point

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

Q-Switched Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile: Power-Insensitive Operating Point and Symmetrized Tem00 Output

Numerical Analysis of Thermal Response of Mid-Infrared High Reflectance Coating under Different Laser Irradiation Angles

Investigations on Transverse-Mode Competition and Beam Quality Modeling in End-Pumped Lasers

Influence of Spherical Aberration of the Thermal Lens on the Mode Profile of A Large-Volume Tem00-Mode Resonator

Development of Resonator Analysis Applied in Hybrid Slab Laser with Consideration of Optical Gain and Thermal Lens Effect.

Combined Guiding Effect in the End-Pumped Laser Resonator.

Influences of Spherical Aberration on Resonator's Stable Zones and Fundamental Mode Output Power Scaling of Solid State Laser Oscillators.

Numerical Modeling of the Thermal Lensing Effect in a Grazing-Incidence Laser

Thermo-stable resonator for intracavity-pumped dual-wavelength narrow-linewidth laser

Symmetric Tem00 Output from Q-Switched Quasi-Concentric Laser Resonator with Line-Shaped End-Pumping Profile

Evaluation of thermally-induced lens of a pentagonal-side-pumped solid-state laser rod

Influence of Spherical Aberrations on the Performance of Dynamically Stable Resonators

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Analysis and Modeling of a Thermal Focal Length in a Corner-Pumped Composite Slab Laser

Design of Directional Prism Resonator Made DPL Operate in TEM 00 Mode with Thermal Stability

Analysis of Thermal Effects in A Pulsed Laser Diode End Pumped Single-Ended Composite Tm:Yag Laser