Abstract:The paper evaluates the nature of the change in the wavefront surface curvature in the initial position, which is formed at the exit pupil of the optical system located directly behind the last refractive surface. To solve the problem, an experimental setup has been developed, consisting of a semiconductor laser and an aberration optical system with a mechanism for moving screens. The arrangement of the optical system with a radiation source at a given limiting parameter causes an increase in the action of wave aberration, which ensures the redistribution of the intensity in the transverse section of the converted laser beam. The center of the diaphragm and the mark on the screen are located on the same axis, which coincides with the axis of the converted laser beam. A functional dependence was obtained between the inclination angle of the normal to the converted laser beam axis of the interference structure on the radial location of the normal intersection point with the wavefront surface relative to the axis laser beam. Based on the use of modern optical systems technologies, the problems of changing the spatial-geometric parameters of the laser beam and obtaining a measuring system using the proposed parameter of the interference structure in the cross section of the laser beam are analyzed.

Numerical and Experimental Results of Wavefront Aberration Caused in a High Power Laser Amplifier

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Modeling of an alkali vapor laser MOPA system

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

Investigation of Pump-to-seed Beam Matching on Output Features of Rb and Cs Vapor Laser Amplifiers

Theoretical Analysis of Thermal-Lensing Effect in a High Power Exciplex Pumped Cs Vapor Laser.

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Kinetic and Fluid Dynamic Modeling, Numerical Approaches of Flowing-Gas Diode-Pumped Alkali Vapor Amplifiers.

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Theoretical Design and Experimental Research on High Power Yb∶ YAG Ceramic Slab Laser Amplifier

Thermal Effects in High-Power Double Diode-End-Pumped Cs Vapor Lasers

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Beam quality improvement by thermally induced aberrations in a diode-end-pumped laser amplifier

Beam Quality Management by Periodic Reproduction of Wavefront Aberrations in End-Pumped Nd:YVO_4 Laser Amplifiers

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Study on the 400 Mm 4 × 2 Combined Slab Amplifier System

Influence of Spherical Aberrations on Fundamental Mode Beam Quality under Different Laser Resonators

Beam Quality Management in Multi-Stage Side-Pumped Nd:YAG MOPA Laser Systems

Laser Beam Wavefront Model Analysis

Influence of Spherical Aberrations on the Performance of Dynamically Stable Resonators