Abstract:It has been considered formerly that the reason why ZnS coating is not able to stand the environmental corrosion is the cross section structure of its column,1 the gaps among the columns and the capillaries formed by the gaps. The gaps among the columns of ZnS coating deposited on the substrate at low temperature are rather big, the packing density is low, so the coating can not have better mechanical pro— perties.2 To obtain ZnS coating with high strength it is necessary to enhance the temperature of the substrate during deposition. But the problem is that the higher the temperature is, the lower the deposition - speed will be. 200°C is nearly the temperature limitation of the substrate at which the deposition can be done. This fact also hinders us to enhance the strength of the coating. Addi tionally, after the temperature of the substrate has been enhanced, the grains of the coating become bigger, and the coating surface becomes more rough. An anti reflecting coating with good optical property must be a film formed by very fine grains. When it serves as a laser coating it must have a uniform and isotropic heat conductivity, therefore the structure formed by fine grians is necessary to enhance laser damage threshold. So it gives rise to inconsistency between the mechanical property and the optical property of the coating. This paper describes a new type of ZnS coating which has been deposited at low temperature, so it possesses fine grains and therefore its optical property is excellent. After annealing, the texture of the coating has been turned from pref erential orientation of (111) surface into that of (iiO),' at the same time, the coating possesses high strength and chemical stability, especially, its laser damage threshold is 1.9 times as high as that of the common one. This coating can be made either on monocrystal line substrate or glass substrate, with a coating area < 200 mm. In the last two years the authors have offered many ZnS coating with high optical properties and high strength as outside surface coating for the laser and thermal imaging systems

Morphology and Hydrophobicity of ZnS Surface Fabricated by Femtosecond Pulse Laser

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Fabrication of micro hole array on the surface of CVD ZnS by scanning ultrafast pulse laser for antireflection

Surface modification of nanostructured ZnS by femtosecond laser pulsing

Effect of wet chemical etching on femtosecond laser fabricated surface microstructure of polycrystalline ZnS

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

Properties Study of ZnS Thin Films Fabricated at Different Substrate Temperatures by Pulsed Laser Deposition

Micro nano antireflective and hydrophobic hierarchical structures ZnS by femtosecond laser

Superhydrophobic Surfaces with Micro-/Nano-structures Prepared by Femtosecond Laser

Femtosecond laser ablation of Zn in air and ethanol: effect of fluence on the surface morphology, ablated area, ablation rate and hardness

Morphology Control by Pulsed Laser in Chemical Deposition Illustrated in ZnO Crystal Growth

Hydrophobic texture screening of laser ablated silicon carbide surface and its influencing factors analysis and optimization

Influence of surface morphology on processing of C/SiC composites via femtosecond laser

Micropattern-assisted absorption enhancement and wettability surface on ZnO via single femtosecond laser beam tailoring

Investigation on the Machinability of Polycrystalline ZnS by Micro-Laser-Assisted Diamond Cutting

Influence Of Pulse Energy And Scanning Speed Of Femtosecond Laser On Surface Roughness Of Sic Ceramics

Rapid fabrication of antireflective structures on ZnS surface by spatial shaping femtosecond laser

Study on the Mechanism of Zns Anti - Reflecting Coating with High-Strength

Surface topography by water jet-guided laser texturing on wettability of monocrystalline silicon

Time-dependent Wettability of Nano-Patterned Surfaces Fabricated by Femtosecond Laser with High Efficiency

Periodic Surface Nanostructures on Polycrystalline ZnO Induced by Femtosecond Laser Pulses