Abstract:Asynchronous circuits with low power and robustness are revived in emerging applications such as the Internet of Things (IoT) and neuromorphic chips, thanks to clock-less and event-driven mechanisms. However, the lack of mature computer-aided design (CAD) tools for designing large-scale asynchronous circuits results in low design efficiency and high cost. This article proposes an end-to-end bundled-data (BD) asynchronous circuit design flow, which can facilitate building asynchronous circuits, even if the designer has little or no asynchronous circuit foundation. Three features that enable this are: 1) a lightweight circuit converter developed in Python can convert circuits from synchronous descriptions to corresponding asynchronous ones at register transfer level (RTL). Desynchronization flow helps designers maintain a "synchronization mentality" to construct asynchronous circuits; 2) a synchronization-like verification method is proposed for asynchronous circuits so that it can be functionally verified before synthesis. Avoids the risk of rework after logic defects are discovered during the synthesis and implementation, as asynchronous circuits often cannot be simulated until gate-level (GL) netlist generation; and 3) the whole implementation flow from RTL to graphic data system (GDS) is based on commercial electronic design automation (EDA) tools. Similar to the design flow of synchronous circuits, it helps designers implement asynchronous circuits with "synchronization habits." Furthermore, to validate this methodology, two asynchronous processors were, respectively, implemented and evaluated in the TSMC 28-nm CMOS process. Compared to their synchronous counterparts, the general-purpose asynchronous RISC-V processor achieves 20.5% power savings. And the domain-specific asynchronous spiking neural network (SNN) accelerator achieves 58.46% power savings and 2.41x energy efficiency improvement at 70% input spike sparsity.

The Design and Implementation of Asynchronous C-Element in a Standard Cell Design Flow

An Improved Asynchronous Wrapper for GALS

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.

A Coarse-grained Asynchronous Data-Driven Design Flow

Development of Standard Cell Library for UMC 0.18 μm Asynchronous Circuit

Optimize Asynchronous Design by Synchronous Synthesis Tool

A novel layout automation flow to facilitate test chip design for standard cell characterization

An End-to-End Bundled-Data Asynchronous Circuits Design Flow: from RTL to GDS

Three CMOS Implementations of Asynchronous Control C-Element with Set

Methodology of Asynchronous Integrated Circuit Design-a Survey

Toward Efficient Asynchronous Circuits Design Flow Using Backward Delay Propagation Constraint

An Asynchronous Design Method and Its Application on a Low-Power RFID Baseband Processor

Design and Tool Flow of a Reconfigurable Asynchronous Neural Network Accelerator

A Synthesizable Asynchronous Wrapper With Standard Cells

Efficient Aging-Aware Standard Cell Library Characterization Based on Sensitivity Analysis

Design Analysis of CMOS Digital Integrated Circuit I/O Cell

Design and Implementation of a 32-Bit Asynchronous Adder

The Design of Asynchronous Microprocessor Based on Optimized NCL_X Design-Flow

Standard Cell Library Design and Optimization Methodology for ASAP7 PDK

Standard cell library establishment and simulation for scan D flip-flops based on 0.5 micron CMOS mixed-signal process

Asynchronous Techniques for System-on-Chip Design