Abstract:Abstract: Adders are one of the most widely used digital components in digital integrated circuit design. With the advances in technology, the design that offers either high speed, low power consumption, less area, or a combination of them is designed. There are various processes performed by the digital circuits among which arithmetic operations are prominent. Three-operand binary adder is the basic functional unit to perform the modular arithmetic in various cryptography and pseudorandom bit generator (PRBG) algorithms. Carry save adder (CS3A) is the widely used technique to perform the three-operand addition. However, the ripple carry stage in the CS3A leads to a high propagation delay. Moreover, a parallel prefix two-operand adder such as Han-Carlson (HCA) can also be used for three-operand addition, significantly reducing the critical path delay at the cost of additional hardware. Hence, a new high-speed and area-efficient adder architecture is designed using pre-compute bitwise addition followed by carry prefix computation logic to perform the three-operand binary addition that consumes substantially less area, low power, and drastically reduces the adder delay. To design a faster computing system with less hardware we require some other architecture. The proposed architecture will reduce the area as well as the delay by replacing the Han-Carlson adder with the Ladner fisher adder in a Highspeed area-efficient three-operand binary adder. The proposed architecture is synthesized with the zynq-7000 library. The proposed architecture reduces the LUT count and delay by 20 and 0.4 nanoseconds respectively. By using these synthesis results, we noted the performance parameters like the number of LUTs and delay. We compared the adders in terms of LUTs (represents area) and delay value

Design and Implementation of a 32-Bit Asynchronous Adder

Design of Adder Based on Abacus Algorithm

Design of Low Power 64-Bit Hybrid Full Adder

A New Implementation of a 16-Bit Self-Timed ALU for Asynchronous Microprocessors

A standard cell automated layout for a CMOS 50 MHz 8*8 bit pipelined parallel Dadda multiplier

Design of low-power and high-speed multiplier

Design of a Novel Low Power 8-Transistor 1-Bit Full Adder Cell.

Energy efficient hybrid full adder design for digital signal processing in nanoelectronics

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

Low power adders using asynchronous pipelined modified low voltage MCML for signal processing and communication applications

A 65nm 8b-Activation 8b-Weight SRAM-Based Charge-Domain Computing-in-Memory Macro Using A Fully-Parallel Analog Adder Network and A Single-ADC Interface

Optimize Asynchronous Design by Synchronous Synthesis Tool

Design of Delay Efficient Hybrid Adder for High Speed Applications

Design of A Fully Pipelined Single-Precision Multiply-Add-Fused Unit

A Computing-in-Memory SRAM Macro Based on Fully-Capacitive-Coupling With Hierarchical Capacity Attenuator for 4-b MAC Operation

A High-Density and Reconfigurable SRAM-Based Digital Compute-In-Memory Macro for Low-Power AI Chips.

Design and analysis of 1-bit hybrid full adder cells for fast computation

A New Implementation of 16-bit Parallel Prefix Adder for High Speed and Low Area.

Design Of Variable Latency Adder Based On Present And Transitional States Prediction

Automatic Adder Tree Re-Synthesis Tool for Digital Compute-in-Memory Low-Power Optimization

A 28nm 32kb SRAM Computing-in-Memory Macro with Hierarchical Capacity Attenuator and Input Sparsity-Optimized ADC for 4b Mac Operation