Abstract:CLAPA-II, formerly known as CLAPA-T, is being built by Peking University with the support of China???s Ministry of Science and Technology. The main purpose of this device is to explore and verify the application performance of a laser-driven particle acceleration beam. For proton therapy, it is desirable to have a highly uniform beam distribution during irradiation. Furthermore, according to experimental results and design experience, low particle current will be one of the main challenges in the application of laser beam acceleration. It is important to improve the efficiency of particle transport to increase the particle current available for applications. In order to improve dose uniformity and maximize transport efficiency, we have made an upgrade to our existing beam dynamics design. The modified design keeps the original characteristics of local achromatic transport, but adds a new section for beam homogenization using octupole fields. This beamline can provide continuously-adjustable beam spots at the target point with diameters from 5 mm to 80 mm and energy dispersion of less than 5%. The set of octupoles enables the beam transport system to provide two selectable distributions, which are similar to a Gaussian distribution and a nearly uniform distribution. The beam parameters required by irradiation are taken as the standard, and the results obtained by beam stacking after homogenization have clear advantages. These advantages can improve both the dose uniformity and the beam utilization rate, thereby mitigating the low average particle current from the laser accelerator.

A Novel Adjustable Aperture for Beam Current Controlling at China-ADS Low Energy Beam Transport Line

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

Beam Commissioning for a Superconducting Proton Linac

Physics Design of the CiADS MEBT

Beam dynamics of china-ads linac

Beam physics design of a superconducting linac

THE STUDIES FOR ADJUSTABLE ENERGY OF PROTON BEAMS FROM PROTON LINEAR ACCELERATOR

Beam dynamics optimization in the LEBT of LLICTF

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Physics design for the C-ADS main linac based on two different injector design schemes

Physics Design of the Superconducting Section of the CiADS Linac

Beam optics design of the superconducting region of the JAEA ADS

Study on transient beam loading compensation for China ADS proton linac injector II

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

Beam distribution homogenization design for laser-driven proton therapy accelerator

Design and experiments of a compact electrostatic low energy beam transport with a double Einzel-lens for a transportable neutron source

ERROR ANALYSIS AND CORRECTION SCHEME IN C-ADS INJECTOR-I*

MTCA.4-based LLRF Control System for the C-ADS Proton Linac Injector I

Transverse Profile Expansion and Homogenization at Target for the Injector Scheme-I Test Stand of China-ADS

Linear optics design of new beam transfer line in Hefei light source

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends