Abstract:We propose and numerically analyze the hybrid Si-Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} strip waveguide switches for Mid-IR wavelength of 2.1 $\mu$m. The switches investigated are one input-one output (on-off) type and one input-two outputs (directional coupler) type. The reversible transition between the switch states is achieved by inducing the phase transition from crystalline to amorphous and vice-versa by application of voltage pulses. The approach of embedding the nanoscale active material Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} within the Si waveguide is taken to enhance the interaction of light with the active region of the switches. The dimensions of the active regions of the switches are optimized to achieve low insertion loss, low switching energy, and high extinction ratio. In case of one input-one output switch, an extinction ratio of 33.79 dB along with an extremely low insertion loss of 0.52 dB is achieved using optimum Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} length of only 0.92 $\mu$m. For one input-two outputs switch, an extinction ratio of 10.33 dB and 5.23 dB is obtained in cross and bar state respectively using an active length of 52 $\mu$m. These values of extinction ratio, which are otherwise 18.59 dB and 8.33 dB respectively, are due to the necessity of doping the Si beneath the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} to facilitate the electrical conduction needed for Joule heating. A suitable gap of 100 nm is kept between the active and passive arm of the directional coupler switch. The electro-thermal co-simulations confirm that phase change occurs in whole of the Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} region in both types of switches.

A 2 × 3 Photonic Switch in SiGe for 1.55μm Operation

Three-wavelength Rearrangeable 3×3 Photonic Switch

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

A 4×4 MMI-MZ optical switch matrix on SOI based on carrier injection

Analysis on Multimode Interference Coupler-Based 1×3 Optical Switch with Mono-Compound Modulation Region

1.55 Μm Reflection-Type Optical Waveguide Switch Based on SiGe/Si Plasma Dispersion Effect

Fabrication of Silicon Photonic Devices by Utilizing Industrial CMOS Technology

1.55 Mu M Reflection-Type Optical Waveguide Switch Based On Sige Si Plasma Dispersion Effect

Highly integrated 3×3 silicon thermo-optical switch using a single combined phase shifter for optical interconnects.

Non-volatile 2 × 2 optical switch using multimode interference in an Sb2Se3-loaded waveguide

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

Compact Nonvolatile 2×2 Photonic Switch Based on Two-Mode Interference

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Compact InGaAsP/InP 3 × 3 multimode-interference coupler-based electro-optic switch

Mid-IR non-volatile silicon photonic switches using nanoscale Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} embedded in SOI waveguide

A CMOS Compatible 1&#x00d7;3 Optical Switch Based on Silicon on Insulator

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

2×2 Electrooptical Switch in Silicon-on-insulator Waveguide

2/spl times/2 electrooptical switch in silicon-on-insulator waveguide

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>