Simulation and comparison of different energy saving schemes in extractive distillation process of ethanol-water system

Zixin LIN,Xing AN,Weizhong AN,Jianmin ZHU

DOI: https://doi.org/10.16085/j.issn.1000-6613.2017-1621

2018-01-01

Abstract:Anhydrous ethanol was produced from the ethanol-water mixture using ethylene glycol as the extractant. Using the process simulation software,the conventional extractive distillation process and four different types of energy saving technologies were simulated and optimized,including double-effect distillation,vapor recompression distillation,dividing wall column distillation and internally heat integrated distillation. The design specification was as follows:the purity of ethanol should be no less than 99.5%,the purity of recovered ethylene glycol should be no less than 99.9%,and the purity of waste water should be greater than 99.5%. Under the same design basis and requirements,the optimum operating parameters of each process were obtained,and different processes were compared from the energy saving effect and economic analysis. The results revealed that although the internally heat integrated distillation technology was the most energy efficient process reducing the energy consumption by 14.1% compared with the conventional extractive distillation process,the most economic technology was double-effect extractive distillation process decreasing the total annual cost by 7.2%. This study provides the theoretical basis and design parameters for the industrialization of the extractive distillation process to produce anhydrous ethanol from the ethanol-water system.