Abstract:Ternary extractive distillation (TED) is an effective and sustainable separation process for treating pharmaceutical wastewater containing ethyl acetate/isopropanol/water, corresponding to three binary azeotropes, to realize the recovery of ethyl acetate and isopropanol. Visual Basic software was used to optimize the extractive distillation process using a single solvent and mixed solvent in different proportions based on a sequential iterative optimization method, and the optimal mixture proportion (30% DMSO+70% EG) of the mixed solvent was determined. The economic and environmental performance of the extractive distillation process with a mixed solvent combined with partial thermal coupling technology was studied. The heat recovery within the separation process was further improved by the energy-efficient heat exchanger network synthesis (HENs) option. The economic and environmental performance of the mixed solvent extractive distillation process combined with heat pump technology was also explored. The results show that for the ternary extractive distillation process, the use of mixed solvent can significantly reduce energy consumption, which can lead to lower total annual cost (TAC) and CO2 emission. Compared with a conventional separation process with mixed solvent, the extractive distillation process combined with partial thermal coupling and heat pump technology further improves the economic and environmental performance. The TAC and CO2 emission of the mixed solvent separation process combined with partial thermal coupling technology were reduced by 12.183% and 19.869%, respectively. The TAC and CO2 emission of the mixed solvent separation process combined with heat pump distillation technology were reduced by 34.782% and 37.156%, respectively, which indicates the feasibility of using these two energy-saving processes for continuously updated cleaner production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c02225?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c02225</a>.Capital and energy calculation formulas, binary interaction parameters for the NRTL model for the separation system, and optimization results: (Table S1) interaction parameters of the NRTL model, (Table S2) basis of economics and equipment sizing, (Figure S1) distillation optimization software based on sequential iteration method, (Table S3) optimal process parameters for extractive distillation process using DMSO, EG, and mixed solvent, and (Table S4) economic and energy consumption results of all processes (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c02225/suppl_file/ie0c02225_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Study on Production of Anhydrous Ethanol from Vacuum Distillation

Process Design of Continuous-Flow Pervaporation Separation for Alcohol Dehydration

Process design and optimization of continuous-flow pervaporation technique for the dehydration of ethanol-water mixture

EXPERIMENTAL STUDY ON A SOLAR DISTILLATION PLANT CHARACTERIZED WITH BUBLLING EVAPORATOR

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Energy-saving Technology in Steady-state Simulation of Ethylene Acetate Production Process Using Aspen Plus

Combined Vapor Permeation and Continuous Solid-State Distillation for Energy-Efficient Bioethanol Production

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Eco-efficient vapor recompression-assisted pressure-swing distillation process for the separation of a maximum-boiling azeotrope

Application of pervaporation technology in ethanol production

Thermodynamic efficiency enhancement of pressure-swing distillation process via heat integration and heat pump technology

Economic, environmental, energy, exergy (4E) analysis and simulated annealing algorithm optimization of dividing-wall column-intensified heterogeneous azeotropic pressure-swing distillation process

Optimization and simulation of vinyl acetate process based on Aspen Plus

Sustainable Wastewater Treatment Via PV-distillation Hybrid Process for the Separation of Ethyl Acetate/isopropanol/water

Energy-Saving Exploration of Mixed Solvent Extractive Distillation Combined with Thermal Coupling or Heat Pump Technology for the Separation of an Azeotrope Containing Low-Carbon Alcohol

Environmental evaluation and comparison of hybrid separation methods based on distillation and pervaporation for dehydration of binary alcohol mixtures with life cycle, PESTLE, and multi-criteria decision analyses

Energy-saving investigation of ester hydrolysis to alcohol by reaction extractive distillation process: from molecular insight to process integration

Energy efficiency analysis of coal-to-ethylene glycol distillation process based on exergy analysis

Optimization of energy-saving distillation system of absorption heat pump based on intermediate heat exchange

Process design and multi-objective optimization for separation of different feed composition of acetonitrile / ethanol / water with extractive distillation by varying pressure / pervaporation