Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Preparation and Electrochemical Properties of MoS2/C Hollow Microspheres

Core-shell Structure of Hierarchical Quasi-Hollow MoS2 Microspheres Encapsulated Porous Carbon As Stable Anode for Li-ion Batteries.

Construction of Hierarchical Hollow MoS2/Carbon Microspheres for Enhanced Lithium Storage Performance

From Dispersed Microspheres to Interconnected Nanospheres: Carbon-Sandwiched Mono Layered Mos2 As High-Performance Anode of Li-Ion Batteries

Preparation of hierarchical C@MoS2@C sandwiched hollow spheres for Lithium ion batteries

Template-assisted Sol–gel Synthesis of Porous MoS2/C Nanocomposites As Anode Materials for Lithium-Ion Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Hollow Mo2C Nanofibers Improve the Electrochemical Performance of Cathode for Lithium-Sulfur Battery

The novel and facile preparation of multilayer MoS2 crystals by a chelation-assisted sol–gel method and their electrochemical performance

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Moo2@Carbon Hollow Microspheres With Tunable Interiors And Improved Lithium-Ion Battery Anode Properties

Rational design of hollow flower-like MoS2/Mo2C heterostructures in N-doped carbon substrate for synergistically accelerating adsorption-electrocatalysis of polysulfides in lithium sulfur batteries

Novel C/MoS2 hollow nanocomposites enhance lithium storage in battery anodes

Integrated design of sandwich-like C@MoS2@C nanospheres as active anode material for lithium-ion batteries

Facile synthesis of MoS 2 confined in yolk-shell hollow mesoporous carbon spheres with enhanced polysulfide binding for high-rate Li-S batteries

A facile synthesis method and electrochemical studies of hierarchical structured MoS2/C-nanocomposite

N-doped carbon-coated MoS2 nanosheets on hollow carbon microspheres for high-performance lithium-ion batteries

Templated spherical coassembly strategy to fabricate MoS2/C hollow spheres with physical/chemical polysulfides trapping for lithium-sulfur batteries

Microscale and molecular regulation for molybdenum disulfide with extended layer spacing for high-performance sodium ion battery anodes

Mo2C-Co heterostructure with carbon nanosheets decorated carbon microtubules: Different means for high-performance lithium-sulfur batteries