Abstract:Molybdenum disulfide shows promise as an anode material for lithium-ion batteries. However, its commercial potential has been constrained due to the poor conductivity and significant volume expansion during the charge/discharge cycles. To address these issues, in this study, N-doped MoS2/C composites (NMC) were prepared via an enhanced hydrothermal method, using ammonium molybdate and thiourea as molybdenum and sulfur sources, respectively. Polyethylene glycol 400 (PEG400) and polyvinylpyrrolidone (PVP) were added in the hydrothermal procedure as soft template surfactants and nitrogen/carbon sources. The crystal structure, morphology, elemental composition, and surface valence state of the N-doped MoS2/C composites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS), respectively. The results indicate that the NMC prepared by this method are spherical particles with a nanoflower-like structure composed of MoS2 flakes, having an average particle size of about 500 nm. XPS analysis shows the existence of C and N elements in the samples as C-N, C-C, and pyrrolic N. As anodes for LIBs, the NMC without annealing deliver an initial discharge capacity of 548.2 mAh·g-1 at a current density of 500 mA·g-1. However, this capacity decays in the following cycles with a discharge capacity of 66.4 mAh·g-1 and a capacity retention rate of only 12% after 50 cycles. In contrast, the electrochemical properties of the counterparts are enhanced after annealing, which exhibits an initial discharge capacity of 575.9 mAh·g-1 and an ultimate discharge capacity of 669.2 mAh·g-1 after 70 cycles. The capacity retention rate decreases initially but later increases and elevated afterward to reach 116% at the 70th cycle, indicating an improvement in charge-discharge performance. The specimens after annealing have a smaller impedance, which indicates better charge transport and lithium-ion diffusion performance.

Template-assisted Sol–gel Synthesis of Porous MoS2/C Nanocomposites As Anode Materials for Lithium-Ion Batteries

From Dispersed Microspheres to Interconnected Nanospheres: Carbon-Sandwiched Mono Layered Mos2 As High-Performance Anode of Li-Ion Batteries

Lamellarly Stacking Porous N, P Co-Doped Mo2 C/C Nanosheets as High Performance Anode for Lithium-Ion Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Core-shell Structure of Hierarchical Quasi-Hollow MoS2 Microspheres Encapsulated Porous Carbon As Stable Anode for Li-ion Batteries.

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Controlled Synthesis of Ultrafine β-Mo2C Nanoparticles Encapsulated in N-Doped Porous Carbon for Boosting Lithium Storage Kinetics

PEG-PVP-Assisted Hydrothermal Synthesis and Electrochemical Performance of N-Doped MoS2/C Composites as Anode Material for Lithium-Ion Batteries

Production of Nanoparticles of MoSe2 and Carbon in One Step to Increase Their Stability for Applications in Sodium-Ion Batteries

CTAB-assisted Synthesis of Single-Layer MoS2–graphene Composites As Anode Materials of Li-ion Batteries

A novel MoS2/C nanocomposite as an anode material for lithium-ion batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Preparation and Electrochemical Properties of MoS2/C Hollow Microspheres

Graphene-like MoS2/amorphous carbon composites with high capacity and excellent stability as anode materials for lithium ion batteries

Integrated design of sandwich-like C@MoS2@C nanospheres as active anode material for lithium-ion batteries

Novel C/MoS2 hollow nanocomposites enhance lithium storage in battery anodes

Facile Preparation of Robust Porous MoS2/C Nanosheet Networks As Anode Material for Sodium Ion Batteries

Facile synthesis of nanoflower-like MoS2/C as anode for lithium-ion batteries

Molten Salt-Assisted Catalytic Preparation of MoS2/α-MoO3/Graphene as High-Performance Anode of Li-Ion Battery

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

L-Cysteine-assisted Synthesis of Layered MoS2/Graphene Composites with Excellent Electrochemical Performances for Lithium Ion Batteries