Abstract:Flexible ultrafine SiC fibers with superior high-temperature stability and excellent oxidation resistance are regarded as one of the most promising materials for high-temperature applications. However, excess oxygen and carbon in the ultrafine SiC fibers limit their thermal stability due to decomposition of the SiCxOy phase. In the present work, flexible ultrafine nearly stoichiometric polycrystalline SiC fibers were fabricated by combining the electrospinning technique and polymer-derived ceramic method. The ultrafine SiC fibers exhibited superior high-temperature stability and oxidation resistance. The retention rates of tensile strength were 90.0 %, 94.2 % and 86.4 % after heat treatment in argon at 1800 °C, 1900 °C and 2000 °C, respectively. TG results of the fibers showed little weight loss of only 1.52 % at 1900 °C in Ar and the weight gain of only 4.1 % up to 1500 °C in air. Such improved thermal stability was achieved through sintering at high temperature for elimination of excess oxygen and carbon with Al doped as the sintering aid to restrain the grain coarsening. The ultrafine SiC fibers still exhibited excellent flexibility without obvious damage when they were heated by the butane blowtorch flame of about 1100 °C in air. Furthermore, the infrared thermography illustrated that the ultrafine SiC fiber membrane also had good thermal insulation performance. The outstanding mechanical properties and thermal stability of ultrafine SiC fibers suggest their potential applications at the high temperature and harsh environment.

Effect of Sintering Temperature on SiC Fiber Structure and Properties

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

SiC fibers with different diameters exhibiting excellent high-temperature resistance and oxidation resistance

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Silicon Carbide/Polysilazane Composite: Effect of Temperature on the Densification, Phase, and Microstructure Evolution

Effects of the Ar flow rate on the composition, structure, and properties of near-stoichiometric SiC fibres that were annealed at 1600°C

Effect of the Sintering Temperature on the Microstructure, Properties and Formation Mechanism of Ceramic Materials Obtained from Polysiloxane Elastomer-Based Ceramizable Composites

Flexible ultrafine nearly stoichiometric polycrystalline SiC fibers with excellent oxidation resistance and superior thermal stability up to 1900 °C

Mechanical Properties and Interfaces of Cf/SiC Composites

The Effect of Heat Treatment on the Properties of SiCf/SiC Composites Prepared with Different SiC Fibers

High-temperature tensile behavior of 3D SiC/SiC composites

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane

Effect of Impurities Control on the Crystallization and Densification of Polymer-Derived SiC Fibers

Oxidation and mechanical properties of SiC fibers after high temperature exposure in air and steam

Microstructure and Mechanical Properties of the Spark Plasma Sintered Tac/Sic Composites: Effects of Sintering Temperatures

Effect of temperature on the structure and mechanical properties of SiC–TiB2 composite ceramics by solid-phase spark plasma sintering

Scheelite Coatings on SiC Fiber: Effect of Coating Temperature and Atmosphere

Effect of Fiber Characteristics on Fracture Behavior of C F /sic Composites

Long-time oxidation behavior of the nearly stoichiometric polycrystalline SiC fibers under air atmosphere at different temperatures