Abstract:In this study, the surface of (Ti-6Al-4V)TC4 alloy was modified via laser cladding. The elemental composition of the coating was (TiAl)95−xCu5Nix, with Ni as the variable (where x = 0, 3, 6, and 9 at.%). Multi-principal alloy coatings were successfully prepared, and their constituent phases, microstructures, and chemical compositions were thoroughly investigated. The hardness and wear resistance of the coatings were analyzed, and the compositions and interfacial characteristics of the different phases were examined via transmission electron microscopy. The analysis revealed that Ni formed a solid solution and a eutectic structure in the Ti(Al, Cu)2 phase. These findings provide valuable insights into the coating properties. Moreover, reciprocal dry sliding friction experiments were conducted to investigate the wear mechanism. The results revealed a significant increase in wear resistance owing to the formation of a Ni solid solution and changes in the coating structure. Additionally, tensile tests demonstrated that the tensile strength of the coatings initially increased and then decreased with varying Ni content. By combining these results with various analyses, we determined that the coating exhibited optimal properties at a Ni content of 6 at.%. Overall, this study comprehensively investigated the microstructure and phase transition behavior of these coatings through various analytical techniques. These findings provide valuable guidance for further optimizing both the preparation process and the performance of the coatings. The coatings exhibit excellent wear resistance and could inspire the design of more advanced protective surfaces.

AppIication of TiBCN Powder as Additive in Laser Coating of Ti6-Al4-V

Laser Cladding Nicrbsi+2%B4c Coating on Ti-6al-4v

Laser Cladding NiCrBSi+2%B<sub>4</sub>C Coating on Ti-6Al-4V

Laser Cladding Ni-Base Composite Coating on Titanium Alloy with Pre-Placed B4C+NiCoCrAlY

Laser cladding of Ni-base composite coatings onto Ti-6Al-4V substrates with pre-placed B4C + NiCrBSi powders

Microstructure And Properties Of Tibcn Ti-6al-4v Base Composites Prepared By Laser Cladding

In-Situ Synthesis of Metal Matrix Composite Coating with Laser Melting-Solidifying Processes

Fabrication and Performance of TiN/TiAlN Nanometer Modulated Coatings

Ni–TiC Coating Deposited on Ti–6Al–4V Substrate by Thermal Spraying and Laser Remelting of Ni-clad Graphite Powder

Laser Cladding Nicocraly Coating on Ti-6al4v

Laser Synthesis of Titanium Aluminides Matrix Composite Coatings Reinforced by In-Situ Titanium Carbide Particles on Ti-6Al-4V Substrate

Microstructures and Wear Properties of TiC Coating Produced by Laser Cladding on Ti-6Al-4V with TiC and Carbon Nanotube Mixed Powders

Study on Interface Microstructure and Laser Re-melting NiCrBSi+TiN Coating

Effect of TiC content on microstructure and properties of TiC/Ni60 coatings on Ti6Al4V alloy deposited by laser cladding

In-situ Synthesized TiC/TiB Ceramic Particle Composite Coating by Laser Cladding on TC4 Titanium Alloy

The Laser Cladding Composite Coating of NiCrBSi+B4C on Ti6Al4V Alloy Substrate

Study of Laser Cladding Three Pre-Placed Powders on Titanium Alloy

Effect of LaB6 addition on the in-situ synthesis of TiB /Ti Ni /TiC reinforced Ni-based composite coatings

TiC reinforced composite coating produced by powder feeding laser cladding

Process optimization and property of Ti-Al-Cr-Nb coating on titanium alloy surface by laser in-situ synthesis

Microstructural and Performance Analysis of (TiAl)95−xCu5Nix Coatings Prepared via Laser Surface Cladding on Ti–6Al–4V Substrates