Abstract:Despite its commercial success, isotactic polypropylene (PP) is not suitable for the applications that require long-term exposure to high-energy conditions, such as elevated temperatures, UV radiation, or high electric fields, due to the combination of polymer chain oxidative degradation, incompatibility with polar additives (antioxidants, stabilizers, etc.), and low material softening temperature. This paper presents a new solution that can simultaneously address both chemical and physical limitations. The idea is to develop a new PP-HP copolymer that contains some specific hindered phenol (HP) groups, homogeneously distributed along the polymer chain. These PP-bound HP pendant groups can not only effectively protect PP chains from the oxidative degradation but also engage in a facile cross-linking reaction to form a 3-D network structure during the oxidation reaction. One accelerated oxidation test in air at 190-210 degrees C shows this distinctive advantage. While a commercial PP polymer (containing common antioxidants and stabilizers) degrades within 1 h, a PP-HP copolymer with about 1 mol % (9 wt %) HP groups shows almost no detectable weight loss after 1000 min. In an ASTM endurance test under a targeted application temperature (140 degrees C in air), the commercial PP shows 1% weight loss within about 10 days. On the other hand, this new PP-HP lasts for 10(5) days (4 order increase) under the same condition. In the strain stress curve measurement, the PP-HP film also shows no detectable change in tensile strength and modulus after constant heating the polymer film at 140 degrees C in air for 1 week. Overall, the experiment results present the potential of expanding PP applications into a much higher temperature range (>140 degrees C) under oxygen oxidative environments.

Preparation and Properties of PPS Composites with Anti Thermal Oxidation Resistance

Double-hindered phenolic SiO 2 composites with excellent oxidation resistance and thermal stability for enhanced thermal oxidation stability of PPS

Improving the Oxidation Resistance of Polyphenylene Sulfide Fibers by Doping Copper Nanoparticles Loaded Halloysite Nanotubes

Increasing Polypropylene High Temperature Stability By Blending Polypropylene-Bonded Hindered Phenol Antioxidant

Investigation on thermal degradation mechanism of poly(phenylene sulfide)

Developing Polypropylene Bonded Hindered Phenol Antioxidants for Expanding Polypropylene Applications in High Temperature Conditions

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

OPPS Fibers with High Temperature Resistance and Excellent Antioxidant Properties by an Oxidation Method

Thermal Aging Effects on the Mechanical Behavior of Glass-Fiber-Reinforced Polyphenylene Sulfide Composites

Polypropylene Copolymer Containing Cross-Linkable Antioxidant Moieties with Long-Term Stability under Elevated Temperature Conditions

Preparation of Poly(phenylene sulfide)/Nylon 6 Grafted Graphene Oxide Nanocomposites with Enhanced Mechanical and Thermal Properties

Thermal oxygen aging mechanism and assessment of aramid chopped fibers/polyphenylene sulfide composite paper

Effect of Heat Treatment on the Mechanical and Tribological Properties of Polyphenylene Sulfide Fiber Materials

Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites

Mechanical and Tribological Properties of Self-Reinforced Polyphenylene Sulfide Composites

Improvement of Mechanical Properties of Polyphenylene Sulfide/Carbon Fiber Composites Modified by Aminated Reinforcement

High performance thermoplastic polymer for the compressive behaviour of carbon fibre reinforced composites

Effect of carboxylic polyphenylene sulfide on the micromechanical properties of polyphenylene sulfide/carbon fiber composites

Mechanical, Thermal, and Flame-Retardant Behaviors of Thermoplastic Polyether–Ester Elastomer Composites with Polyphenylene Oxide and Aluminum Hypophosphite

Cyclic (phenylene sulfide) treated carbon fiber for facile preparation of high performance PEEK based anti-wear composites

Fabrication and characterization of polyphenylene sulfide composites with ultra-high content of carbon fiber fabrics