Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. This study investigates the impact of infrared heating and annealing on the mechanical properties of carbon fiber-reinforced polyphenylene sulfide (CF-PPS) and graphene nanoplatelet (GNP)-reinforced CF-PPS composites in Material extrusion (MEX) additive manufacturing. GNP/CF-PPS composites are prepared by mechanically mixing CF-PPS plastic particles with GNP particles and subjecting them to infrared heating and annealing treatments during the three-dimensional (3D) printing process. Three-point bending tests assess the mechanical properties of the samples. The results reveal that the 0.03 wt.% GNP/CF-PPS sample, subjected to infrared heating followed by annealing, exhibits a 30% increase in bending strength compared to pure CF-PPS, demonstrating that the combined treatment significantly enhances mechanical performance. Microscopy observations using a Keyence VH7000 digital optical microscope and a scanning electron microscope (SEM) confirm that GNP addition and infrared irradiation lead to reduced surface roughness and fewer fracture cross-sectional pores. The interlayer bonding improves notably, indicating enhanced internal density and structural stability. Furthermore, differential scanning calorimetry analysis shows a 20% increase in crystallinity for heat-treated samples, contributing to better interlaminar bonding and reduced temperature gradients during printing. Finite element simulations using MATLAB and ABAQUS software corroborate these findings, demonstrating that infrared heating proves more effective than varying GNP content alone in reducing deformation, residual stress, and temperature differences during the MEX process. These results provide valuable insights into improving the mechanical properties and stability of MEX-manufactured large-dimensional composite materials through optimized thermal management.

Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

Effect of Carbon Nanotube on Thermal, Tribological and Mechanical Properties of 3D Printing Polyphenylene Sulfide

Effects Of Crystallinity Control On Mechanical Properties Of 3d-Printed Short-Carbon-Fiber-Reinforced Polyether Ether Ketone Composites

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Crystallization mechanism and mechanical properties of CF/PPS thermoplastic composites manufactured by laser-assisted automated fiber placement

Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites

High performance thermoplastic polymer for the compressive behaviour of carbon fibre reinforced composites

Infrared on-site heating for material extrusion additive manufacturing of carbon fiber filled polyphenylene sulfide and its nano-graphene-reinforced alternatives

Effect of processing parameters on degree of crystallinity and mechanical performance of CF/PEKK aerospace composites

Understanding Processing Parameter Effects for Carbon Fibre Reinforced Thermoplastic Composites Manufactured by Laser-Assisted Automated Fibre Placement (AFP)

Effect of Fiber Content on Mechanical Properties of Carbon Fiber-Reinforced Polyether-Ether-ketone Composites Prepared Using Screw Extrusion-Based Online Mixing 3D Printing

Effect of Temperature History During Additive Manufacturing on Crystalline Morphology of Polyether Ether Ketone

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

EFFECTS OF EXTRUSION RATE AND POST-ANNEALING ON MECHANICAL PROPERTIES AND PRINTING QUALITY OF ADDITIVELY MANUFACTURED CARBON FIBER REINFORCED POLYETHERKETONEKETONE (PEEK) PARTS

The Influence of Thermal Parameters on the Self-Nucleation Behavior of Polyphenylene Sulfide (PPS) during Secondary Thermoforming

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Effects of processing parameters and annealing on the mechanical properties of polyether ether ketone(PEEK) via fused deposition modeling(FDM)

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts