Abstract:The working portfolio to explore the effects of isothermal annealing on mechanical properties of HFDM‐prepared composites. Fused deposition modeling (FDM) based large‐area additive manufacturing has advanced significantly, particularly for producing large parts with high‐performance short fibrous composites. To improve the mechanical performance of these manufactured parts, isothermal annealing is often employed as a post‐treatment for FDM‐produced components. Hence, this study examines the impact of isothermal annealing on the mechanical properties of short carbon fiber‐filled Polyamide 12 (PA12‐CF) and polyethylene terephthalate glycol (PETG‐CF). Samples are prepared using a customized high‐extrusion‐rate FDM (HFDM) system with varying key printing parameters (layer height and extrusion width). Three‐point bending tests are employed to assess the bending strength, modulus, and fracture deflection of the samples. Results show that annealing treatment significantly enhances the bending performance of PA12‐CF, with strength and modulus increasing by 27.8% and 31.2%, respectively. In contrast, PETG‐CF exhibits relatively minor improvements in bending strength (8.1%) and modulus (2.7%). Optical microscopy reveals that different printing parameters notably influence the alignment of short carbon fibers, affecting the mechanical properties, while the annealing treatment does not alter these parameter‐dependent trends. Finite element simulations further demonstrate that the presence of carbon fibers contributes to a progressive enhancement of the polymer matrix, which impacts mechanical improvement during annealing. Highlights High‐extrusion‐rate FDM is used to prepare PA12 and PETG composite samples. Annealing improves properties more in semi‐crystalline PA12‐CF samples. Meso‐structural analysis reveals that printing parameters play a crucial role. Short‐carbon‐fiber boosts strengths of the polymer matrix during annealing.

Influences of heat treatment on mechanical properties of SCF/PEEK composites in FDM‐3D printing process with UV laser assistance

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Mechanism and Behavior of Laser Irradiation on Carbon Fiber Reinforced Polyetheretherketone (CF/PEEK) During the Laser-Assisted In-Situ Consolidation Additive Manufacturing Process

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

A multiscale study of heat treatment effects on the interlayer mechanical properties of 3D printed continuous carbon fiber‐reinforced composites

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Interlayer bonding improvement of PEEK and CF-PEEK composites with laser-assisted fused deposition modeling

Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization

CT scan, EBSD and nanoindentation analysis of 3D-printed parts with post-process heat-treatment

Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Thermodynamic Coupling Forming Performance of Short Fiber-Reinforced PEEK by Additive Manufacturing

Effects of processing parameters and annealing on the mechanical properties of polyether ether ketone(PEEK) via fused deposition modeling(FDM)

Infrared on-site heating for material extrusion additive manufacturing of carbon fiber filled polyphenylene sulfide and its nano-graphene-reinforced alternatives

Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites

Effect of Heat Treatment on Elastic Properties and Fracture Toughness of Fused Filament Fabricated PEEK for Biomedical Applications

Effect of in Situ Thermal Treatment on Interlayer Adhesion of 3D Printed Polyetherimide (PEI) Parts Produced by Fused Deposition Modeling (FDM)

Interlayer enhancement of 3D printed CF/PLA composites via localized microwave welding and annealing-induced crystallization

Effect of heat‐treatment on compressive response of 3D printed continuous carbon fiber reinforced composites under different loading directions