Abstract:Pulsating heat pipe (PHP), as a potential low-grade energy conversion system, has been drawn great attentions in recent years. GO (Graphene Oxide) nanoparticle with SDS (Sodium Dodecyl Sulphate) surfactant based-fluid, as a modified working fluid, was introduced here to enhance thermal performance of PHP. Firstly, an experimental investigation on PHP charged with novel nanofluid has been fully conducted to determine the influence of heat powers and nanoparticle mass concentrations on the thermo-hydrodynamic behavior. Our experimental results indicated that the pumping active and pulsation motions were strengthened for the PHP filled with proposed GO-SDS nanofluid. Average enhancement rates of thermal performance 27% and 7% were successfully achieved in optimum concentration 0.1 wt.% and filling ratio 60% of modified nanofluid corresponding to deionized water and GO nanofluid (without SDS solution), respectively. Subsequently, numerical modelling of fluid flow and heat transfer process in PHP with novel nanofluids was established by utilizing CFD/VOF phase interface tracking methodology. The flow behaviors including bubble growth, compression and merging in the process and oscillation heat transfer performance inside PHP were subsequently observed and analyzed. The mechanism of heat transfer enhancement of GO nanofluid PHP with the change of surface tension was further discussed. CFD results demonstrated that lower surface tension of nanofluid causes a 5.11% reduction in liquid phase fraction of original GO nanofluid, and the activation of nuclear boiling at a lower temperature and the reduction of contact angle. Thereby it promotes the evaporation heat transfer intensity of PHP, then effectively decaying the temperature peak of evaporation section. The modified nanofluid ( σ =42.6 mN/m) was further numerically confirmed a much better heat transfer performance 13% comparing with that of GO nanofluid without SDS solution ( σ =72.8 mN/m). Present research results could facilitate the applications of PHP with proposed novel nanofluids in the relevant fields, such like building energy conversion and management and electronic cooling.

Influence of SDBS on start time and heat transfer performance of pulsating heat pipe

Effects of the Surfactant Solution on the Performance of the Pulsating Heat Pipe

Experimental Investigation of the Influence of Surfactant on the Heat Transfer Performance of Pulsating Heat Pipe

Evaporating Temperature Uniformity of the Pulsating Heat Pipe with Surfactant Solutions at Different Concentrations

Experimental Research on the Start-Up Characteristics and Heat Transfer Performance of Pulsating Heat Pipes with Rectangular Channels

Investigation on the Influence of Different Heat Transmission Distances on Thermo-Hydrodynamic Characteristics of Pulsating Heat Pipes

Partial Visualization Study on Flow, Startup and Heat Transfer Characteristics of Closed-Loop Pulsating Heat Pipe with R1336mzz(Z)

Experimental Research on Heat Transfer Performance of 3 mm Closed Pulsating Heat Pipe

Performance of a Vertical Closed Pulsating Heat Pipe with Hydroxylated MWNTs Nanofluid

Transient Numerical Model on the Design Optimization of the Adiabatic Section Length for the Pulsating Heat Pipe

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Experimental investigation on heat transfer performance of closed-loop pulsating heat pipe with large inner diameter

Experimental Study on the Thermo-Hydrodynamic Characteristics of a Nitrogen Pulsating Heat Pipe

The Impact of Gravity on the Performance of Pulsating Heat Pipe Using Surfactant Solution

Experimental investigation and semi-empirical correlations for a pulsating heat pipe filling with hybrid nanofluids applied for low-grade energy recovery

Numerical investigation on the start-up and heat transfer performance of dual-diameter pulsating heat pipes

Experimental investigation on a pulsating heat pipe with low number of turns at liquid hydrogen temperature range

Experimental Study on a Hydrogen Pulsating Heat Pipe in Different Heating Modes

Fluid Hydrodynamics and Thermal Transports in Nanofluids Pulsating Heat Pipes Applied for Building Energy Exploitations: Experimental Investigations and Full Numerical Simulations

Numerical Investigation on Pulsating Heat Pipes with Nitrogen or Hydrogen

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe