Abstract:Polyamide 6 (PA6) is an important engineering thermoplastic, very widely used but prone to thermal degradation during extrusion at temperature not far from its melt temperature (220°C). Typically, and as measured in this study, PA6 extruded at temperature of 300°C shows a 40% decrease in tensile modulus compared with non‐extruded PA6. To rebuild PA6 molecular weight, the easiest and cheapest method is to use an appropriate chain extender. Many chain extenders have been used in the past but they are essentially suited to nucleophile induced degradation, targeting split PA6 chains carboxyl COOH and amine NH2 end groups. What have been lacking are effective chain extenders for thermally only induced degradation, i.e. for the practical cases where the PA6 is thoroughly dried before extrusion. For such a case, the degradation reaction mechanism dictates that the solution is to develop chain extenders that target the split PA6 chains amide CONH2 groups not the carboxyl COOH and amine NH2 end groups. As amide groups strongly react with anhydride functionalities, we test the effectiveness of a novel chain extender, Joncryl® ADR 3400, a styrene maleic anhydride copolymer with multiple, repeating anhydride functionality. Assessment of chain extension in this study is done as with previous work, using rheology, mechanical and thermal properties of PA6 extruded on its own and with the chain extender. The viscoelastic data conclusively show the efficacy of such chain extender with more than 10‐fold changes in the comparative values of the extruded sample storage modulus G’ and as much as an 85% increase in the tensile modulus. POLYM. ENG. SCI., 59:E25–E31, 2019. © 2018 Society of Plastics Engineers

The Influence of Epoxy-chain Extender on the Properties of the Recycled PA66

Influence of Selection of Extruders on the Processing of Recycled PET Flakes

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Synthesis of Epoxy-chain Extender and the Chain Extension Effect on the Recycled PET in Reactive Extruding

A Strategy Towards Simultaneously Improving Strength and Processability of Polyamide 6 Using Bespoke Dynamic Covalent Chain Extender

Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Chain Extension of Polyamide 6 Using Multifunctional Chain Extenders and Reactive Extrusion for Melt Foaming

Effect of chain extender on the morphological, rheological and mechanical properties of biodegradable blends from PBAT and P34HB

STUDY ON RECYCLED PET/PA66 COMPOSITE

Research on Recycled PET/PA6 Blend

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Recycled Poly(Ethylene Terephthalate) from Waste Textiles with Improved Thermal and Rheological Properties by Chain Extension

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Influence of chain extension on the compatibilization and properties of recycled poly(ethylene terephthalate)/linear low density polyethylene blends

Reactive extrusion of recycled poly(ethylene terephthalate) with polycarbonate by addition of chain extender

Effect of thermal-oxidative and mechanical degradation of recycled LDPE on foaming

Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)

Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender

Eliminating the thermal degradation of polylactic acid by the modification of a macromolecular epoxy‐type chain extender