Abstract:ABSTRACTReactive extrusion was used to modify virgin polyamides 6 (v‐PA6) and to prepare chain extended PA6 (CE‐PA6) and long‐chain branched PA6 (LCB‐PA6) for the melt foaming process. This was done using a twin‐screw extruder and the following modifiers: a chain extender ADR‐4368 and a branching agent maleic anhydride grafted polypropylene. A reaction mechanism was proposed to explain the chain extension and long‐chain branching reactions and was verified by the Fourier transform infrared spectroscopy data. The analysis of the gel permeation chromatography data showed that LCB‐PA6 presented a strong increase in the molecular weight and in the dispersity index. Moreover, the rheological properties of the v‐PA6 and modified PA6 resins were characterized by a dynamic shear test. The LCB‐PA6 compared with CE‐PA6 showed much higher shear viscosity and longer characteristic relaxation times, indicating the presence of an LCB structure. A uniaxial elongation test showed that the LCB‐PA6 had the highest melt viscosity and melt strength as well as most obvious strain‐hardening behavior. A high‐pressure differential scanning calorimeter under compressed CO2 was used to investigate the PA6's crystallization properties so as to analyze its minimum temperature of foaming windows. The melt foamability of the CE‐PA6 and the LCB‐PA6 was verified by batch melt foaming experiments with CO2 as the blowing agent and maximum temperature of foaming windows was also quantitatively determined by numerical simulation of bubble growth based on the rheological measurements. The results showed that the LCB‐PA6 foams had a smaller cell diameter, a larger cell density, a greater expansion ratio, and wider foaming temperature window than the CE‐PA6. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48138.

Chain Extension of Polyamide 6 Using Multifunctional Chain Extenders and Reactive Extrusion for Melt Foaming

Determination of Modified Polyamide 6's Foaming Windows by Bubble Growth Simulations Based on Rheological Measurements

Study on Chain Extension Blending Modification and Foaming Behavior of Thermoplastic Polyamide Elastomer

Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender

Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion

Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types

Chain extension of thermoplastic polyamide elastomer and its foaming performance

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

A Strategy Towards Simultaneously Improving Strength and Processability of Polyamide 6 Using Bespoke Dynamic Covalent Chain Extender

ancy and rheological properties of PA 6 / MCA modi fi ed by DOPO-based chain extender

Rheological and Foaming Behaviors of Long-Chain Branched Polyamide 6 with Controlled Branch Length

Chain extension of PA1010 by reactive extrusion by diepoxide 711 and diepoxide TDE85 as chain extenders

Preparation and characterization of long‐chain branched PA6 by UV‐irradiation of included methacrylate monomers after extrusion

Rheological behavior, crystallization properties, and foaming performance of chain-extended poly (lactic acid) by functionalized epoxy

Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains

Application of bis(glycidyloxy)phenylphosphine oxide as a chain extender for polyamide-6

Fabrication of robust polyamide 6 with local cross‐linked structure via dynamic vulcanization

Reactive processing of PA6/EPDM‐MA blends as modifier for application and development of high‐performance polypropylene

Bio-based PA56 modified by PA66 and its supercritical CO2 foaming behaviour

Microcellular extrusion foaming of long-chain branched polyamide 6 composites

Eliminating the thermal degradation of polylactic acid by the modification of a macromolecular epoxy‐type chain extender