Abstract:Plastic foam molding methods include thermoforming, extrusion and injection molding. Injection foam molding is a one-time molding method with high production efficiency and good product quality. It is suitable for foamed plastic products with complex shapes and strict size requirements. It is also the main method for producing structural bubbles. In this investigation, we developed a structural foam injection molding technology using the gas supply equipment connected to the unique plasticizing mechanism of the injection machine and studied its influence on the specimens' melt rheology quality and foam structures. In the experiment, the forming material was polypropylene (PP), and the gas for mixing/forming foaming characteristics was nitrogen (N2). Additionally, in order to observe the rheological properties of N2/melt mixing, a melt flow specimen mold cavity was designed and the change in the melt viscosity index was observed using a melt pressure sensing element installed at the nozzle position. With the nitrogen supply equipment connected to a unique plasticizing mechanism, the mixing of gas and molten plastic can be achieved at the screw plasticizing stage, where the foaming effect is realized during the melt-filling process due to the thermodynamic instability of the gas. It was also found that an increase in N2 fill content increased melt fluidity, and the trend of melt pressure and melt viscosity index showed that the higher the gas content, the lower the trend. The foaming characteristic depends on the gas thermodynamic instability and the pressure release, so it can be seen from the melt fill path that, the greater the pressure near the gate, the lower the foaming amount and the internal structure (SEM) after molding; the farther from the gate, the greater the relative increase in the foaming growth/amount. This phenomenon will be more obvious when the N2 fill content is increased.

Study on Molecular Dynamics Simulation for Adsorption-diffusion Behavior of Gas Molecules in Packing Stage of Injection Molding

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Sorption and Diffusion of CO2/N2 in Gas Mixture in Thermally-Rearranged Polymeric Membranes: A Molecular Investigation

Gas Adsorption and Diffusion Behaviors in Interfacial Systems Composed of a Polymer of Intrinsic Microporosity and Amorphous Silica: A Molecular Simulation Study

Research on Flow Pattern and Molecular Mechanisms of Polymer Molten During Injection Filling Stage

Study on the Dissolution and Diffusion of Supercritical Carbon Dioxide in Polystyrene Melts Based on Adsorption and Diffusion Mechanism

Diffusion Behavior of Polystyrene/Poly(2,6-dimethyl-1,4-phenylene Oxide) (PS/PPO) Nanoparticles Mixture: Diffusion Mechanism for Liquid PS and Glassy PPO

Experiment and Simulation of Foaming Injection Molding of Polypropylene/nano-Calcium Carbonate Composites by Supercritical Carbon Dioxide

Solubility and Diffusivity of CO2 in Isotactic Polypropylene/Nanomontmorillonite Composites in Melt and Solid States

Effects of Injection Molding Process Parameters on the Chemical Foaming Behavior of Polypropylene and Polystyrene

Optimization of the gas-assisted injection moulding process using multiple gas-injection systems

Polystyrene Chain Geometry Probed by Ion Mobility Mass Spectrometry and Molecular Dynamics Simulations

Mutual and Thermal Diffusivities in Binary Mixtures of Polystyrene with Dissolved N2 or CO2 by Dynamic Light Scattering

Investigation of Crystallization Behavior of Solid and Microcellular Injection Molded Polypropylene/nano-Calcium Carbonate Composites Using Carbon Dioxide As a Blowing Agent

Study on the Gas Permeabilities in Styrene-Butadiene Rubber by Molecular Dynamics Simulation

Computing Gas/melt Free Interface of Gas-Assisted Injection Molding

Study of the Dissolution and Diffusion of Propane, Propylene and Nitrogen in Polydimethylsiloxane Membranes with Molecular Dynamics Simulation and Monte Carlo Simulation

Molecular Dynamics of Different Polymer Blends Containing Poly(2,6-Dimethyl-1,4-phenylene Ether).

Molecular Simulation on Permeation Behavior of CH4/CO2/H2S Mixture Gas in PVDF at Service Conditions

Strategy to control CO2 diffusion in polystyrene microcellular foaming via CO2-philic additives

Study on the Flow, Foaming Characteristics and Structural Strength of Polypropylene Structural Foam Injection Molding by Innovative Nitrogen and Molten Plastic Mixing Mechanism