Abstract:Flow marks are common surface defects that occur in injection-molded products. Their formation may be related to the flow process of the melt in the mold. Through dimensional analysis, we have discovered that the geometric shape of the flow field is controlled by specific dimensionless quantities. These quantities can be summarized as follows: geometric dimensionless quantities related to the shape of the mold, material dimensionless quantities related to the melt and mold materials, and physical dimensionless quantities related to the flow. When the geometric shape of the mold changes proportionally, with the melt and mold material fixed, and the initial temperature of the melt and mold fixed, the geometric shape of the flow field will be solely controlled by the Weissenberg number Wi. If Wi is kept constant, changing the injection speed, changing the relaxation time of the polypropylene melt, or scaling the mold will result in similar geometric shapes of the flow field. If the size of the mold is not changed, the geometric shape of the flow field will be the same. Since the dimensionless equation represents a similar system of all sizes, we verified the above conclusion through molecular dynamics simulations at a smaller scale. After further improvement of the micro simulation system, there is a possibility of visualizing the formation process of flow marks. This would greatly aid in the advancement of theory and the elimination of flow marks in production and experiments. This work also illustrates that the methodology of dimensional analysis plus molecular dynamics simulation may be applied to a wider range of other systems, scaling down large systems and thus significantly reducing their computational effort.

Computing Gas/melt Free Interface of Gas-Assisted Injection Molding

Numerical simulation of filling flow of polymer melt in injection molding

Effect on Residual Wall Thickness of Parts with Floating Core Injection of Water-Assisted Injection Molding

Influence of Gas Inlet Slit Width on Gas-Assisted Plastic Micro-Tube Extrusion

Optimization of the gas-assisted injection moulding process using multiple gas-injection systems

INTEGRATED SIMULATION OF MELT FLOW, FIBER FRACTURE AND FIBER ORIENTATION FOR FIBER REINFORCED PLASTICS IN INJECTION MOLDING

Dimensional Analysis Theory and Molecular Dynamics Simulation of Polypropylene Melt Flow during Injection Molding Process

Model and Simulation of Water Penetration in Water-Assisted Injection Molding

Comparative analysis of flow factors and crystallinity in conventional extrusion and gas-assisted extrusion

Numerical Simulation and Experimental Verification of the Filling Stage in Injection Molding

Integrated Simulation of Fluid Flow and Heat Transfer in Injection Molding for the Prediction of Shrinkage and Warpage

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Melt Temperature Profile Prediction for Thermoplastic Injection Molding

A New Algorithm for Non-Newtonian Flow and Its Application in Mould Filling Process

3D Flow Simulation for Viscous Nonisothermal Incompressible Fluid in Injection Molding

Multi-Objective Optimization of Gas-Assisted Injection Molding by Considering of Gas Fingering Defect

Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts

Effect of gas on the polymer temperature in external gas-assisted injection molding

SIMULATION OF INJECTION MOLDING PROCESS USING ADAPTIVE COUPLED ARBITRARY LAGRANGIAN-EULERIAN FINITE ELEMENT AND MESHFREE METHOD

Hybrid optimization approach for gas-assisted injection molding based on metamodeling and particle swarm algorithm

Effects of convective schemes and geometric reconstruction scheme on interface of multiple melt flows