Abstract:Polymer nanocomposite foams have received considerable attention because of their potential use in advanced applications such as bone scaffolds, food packaging, and transportation materials due to their low density and enhanced mechanical, thermal, and electrical properties compared to traditional polymer foams. In this study, silica nanofillers were used as nucleating agents and supercritical carbon dioxide as the foaming agent. The use of nanofillers provides an interface upon which CO 2 nucleates and leads to remarkably low average cell sizes while improving cell density (number of cells per unit volume). In this study, the effect of concentration, the extent of surface modification of silica nanofillers with CO 2 -philic chemical groups, and supercritical carbon dioxide process conditions on the foam morphology of poly(methyl methacrylate), PMMA, were systematically investigated to shed light on the relative importance of material and process parameters. The silica nanoparticles were chemically modified with tridecafluoro-1,1,2,2-tetrahydrooctyl triethoxysilane leading to three different surface chemistries. The silica concentration was varied from 0.85 to 3.2% (by weight). The supercritical CO 2 foaming was performed at four different temperatures (40, 65, 75, and 85°C) and between 8.97 and 17.93 MPa. By altering the surface chemistry of the silica nanofiller and manipulating the process conditions, the average cell diameter was decreased from 9.62 ± 5.22 to 1.06 ± 0.32 μ m, whereas, the cell density was increased from 7.5 ± 0.5 × 10 8 to 4.8 ± 0.3 × 10 11 cells/cm 3 . Our findings indicate that surface modification of silica nanoparticles with CO 2 -philic surfactants has the strongest effect on foam morphology.

Strategy to control CO2 diffusion in polystyrene microcellular foaming via CO2-philic additives

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Formation Mechanism of Bi-modal Cell Structure Polystyrene Foams by Synergistic Effect of CO2-philic Additive and Co-blowing Agent

Dual Role of PDMS on Improving Supercritical CO2 Foaming of Polypropylene: CO2-philic Additive and Crystallization Nucleating Agent

High Performance Attapulgite/Polypyrrole Nanocomposite Reinforced Polystyrene (PS) Foam Based on Supercritical CO2 Foaming

Systematic Study of Alcohols Based Co-Blowing Agents for Polystyrene Foaming in Supercritical CO2: Toward the High Efficiency of Foaming Process and Foam Structure Optimization

A Comparative Study of the Effect of Multidimensional Carbon Fillers on Polystyrene Using Supercritical Carbon Dioxide Foaming

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Microcellular Foaming of Polysulfones in Supercritical CO2 and the Effect of Co-Blowing Agent

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Manipulation of Polymer Foam Structure Based on Co2-Induced Changes in Polymer Fundamental Properties

Synthesis of Ionic Liquids Copolymerize Styrene and Their Nucleation, Carbon Dioxide Sorption Effect on Supercritical Carbon Dioxide Microcellular Foaming

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Controlling Sandwich‐structure of PET Microcellular Foams Using Coupling of CO2 Diffusion and Induced Crystallization

Fabrication of Polystyrene/nano‐caco3 Foams with Unimodal or Bimodal Cell Structure from Extrusion Foaming Using Supercritical Carbon Dioxide

Effect of Additives on the Dynamic Bubble Growth Behavior of Polymer Foam Evaluated with In-Situ Visualizations and Simulations

Strategy for Preparation of Microcellular Rigid Polyurethane Foams with Uniform Fine Cells and High Expansion Ratio Using Supercritical CO2 As Blowing Agent

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Batch Foam Processing of Polypropylene/Polydimethylsiloxane Blends

Synergetic Effect Between Curing Reaction and CO2 Diffusion for Microcellular Epoxy Foam Preparation in Supercritical CO2