Abstract:<p>Poly(lactic acid), a promising biodegradable polymer, is restricted by poor heat resistance, which is determined by the crystallization. It is important to expound the relationship between crystal structure and thermal, mechanical performance. Several PLA specimens were prepared by fully crystallized at different temperature (100 ºC, 110 ºC, 115 ºC, 120 ºC, and 130 ºC) from melt state. The morphology, crystallization behaviors, thermal and mechanical properties were evaluated by polarizing optical microscope (POM), wide-angle X-ray diffraction (WAXD), differential scanning calorimeter (DSC), dynamic mechanical analysis (DMA), and Vicat softening temperature (VST), respectively. It was found that the PLA crystal shows the characterization of spherulite and many nuclei are generated at low temperature (100 ºC and 110 ºC). The nuclei gradually decrease and the spherulites grow as the crystallization temperature increases. Compared with the amorphous PLA specimens, the tensile strength of crystallized samples gradually decreases from 29.4 MPa to 25.8 MPa and the VST is improved from 51.6 ºC to 64.9 ºC. It confirms that the crystallization is an effective way to enhance the heat resistance. However, when the temperature reaches 130 ºC, the crystalline and amorphous region aggregate, forming the distinct two phases, which leads to a decrease in VST (53.2 ºC). Meanwhile, the spherulites become irregular, larger, and imperfect at high temperature, resulting in the further deterioration of mechanical performance. In addition, the molecular dynamics was further used to simulate the structural evolution during the crystallization and reveals the mechanism behind the relationship.</p>

Rheology Behavior and Thermal Degradation Kinetic of PLA Material Toughened by PCL

Crystallization Behavior and Mechanical Properties of Poly(Epsilon-Caprolactone)/Cyclodextrin Biodegradable Composites

Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ε-caprolactone) blends

Preparation and property evaluations of PCL/PLA composite films

A study on the mechanical, thermal properties and crystallization behavior of poly(lactic acid)/thermoplastic poly(propylene carbonate) polyurethane blends

Construction of high-performance and sustainable polylactic acid composites for 3D printing applications with plasticizer

Rheological, Thermal, and Degradation Properties of PLA/PPG Blends

A strategy to prepare high‐robust and ultra‐tough polylactic acid/polycaprolactone/talc composites with thermo‐resistance

CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-co-GLYCOLIDE) AND POLY(ε-CAPROLACTONE)

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

Improved miscibility and toughness of biological poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/poly(lactic acid) blends via melt-blending-induced thermal degradation

Preparation and Characterization for the Thermal Stability and Mechanical Property of PLA and PLA/CF Samples Built by FFF Approach

Effect of poly(lactic acid) crystallization on its mechanical and heat resistance performances

Morphology, thermal properties, mechanical property and degradation of PLGA/PTMC composites

A Novel Composite Coupled Hardness with Flexibleness—polylactic Acid Toughen with Thermoplastic Polyurethane

Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility

A feasible strategy to balance the performance of stereo-complexed polylactide by incorporating poly(butylene adipate-co-terephthalate)

Highly Toughened and Heat-Resistant Poly(lactic acid) with Balanced Strength Using an Unsaturated Liquid Crystalline Polyester via Dynamic Vulcanization

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Effects of Poly(ε-caprolactone) on the Properties of Poly (lactic acid)/Poly (butylene succinate) Blends

High Performance Polylactide Toughened by Supertough Polyester Thermoplastic Elastomers: Properties and Mechanism