Abstract:Super-tough poly(lactic acid)/polycarbonate (PLA/PC) (50/50) blends with an excellent balance of stiffness, toughness, and thermal stability were systematically designed and characterized. Poly(methyl methacrylate) (PMMA) was utilized as a novel, highly effective nonreactive interphase to promote PLA-PC phase compatibility. Partial miscibility of PMMA with both PLA and PC produced strong molecular entanglements across the PLA-PC phase boundary followed by an excellent phase adhesion. This was predicted from interfacial energy measurements and supported by dynamic mechanical thermal analysis, morphological observations, and mechanical tests. Ternary PLA/PC/PMMA blends exhibited an exceptional set of stiffness, tensile and flexural strength, tensile and flexural ductility, and thermal stability together with improved impact strength compared with neat PLA and uncompatibilized PLA/PC blends. Addition of nonreactive polybutadiene-g-styrene-co-acrylonitrile (PB-g-SAN) impact modifier to the compatibilized blend resulted in further dramatic improvements in the dispersion state of PC and PMMA phase domains followed by the development of an interconnected structure of PC, PMMA, and PB-g-SAN domains in the PLA matrix. Such a network-like morphology, with rubbery particles percolated at the interface between the dispersed structures and surrounding PLA matrix, produced a tremendous increase in impact resistance (≈700 J/m) and tensile ductility (≈200% strain) while maintaining excellent stiffness (≥2.1 GPa). The combined effects of interfacial localization of impact modifier particles, network-like morphology (extended over the entire volume of the blend), and strong phase interactions between the components (due to mutual miscibility) are described to be responsible for super-tough behavior. The role of PMMA as an efficient interphase adhesion promoter in the toughened quaternary blends is also clarified. Impact fractography revealed multiple void formations, plastic growth of microvoids, and the formation of void-fibrillar structures around as well as inside the dispersed structures as the main micromechanical deformation processes responsible for massive shear yielding and plastic deformation of blends. Blends designed in this work offer remarkable improvements in tensile and flexural ductility, impact resistance, and heat deflection temperature compared with neat PLA resin. The overall characteristics of these blend systems are comparable and/or superior to those of several commercial thermoplastic resins.

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Super tough poly(lactic acid) blends: a comprehensive review

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

Super-Tough PLA-Based Blends with Excellent Stiffness and Greatly Improved Thermal Resistance via Interphase Engineering

Mechanical, Thermal Properties and Shape Memory Behaviors of PLA/PCL/PLA-g-GMA Blends

Research on the Miscibility, Mechanical Properties and Printability of Polylactic Acid/poly (Ε-Caprolactone) Blends: Insights from Molecular Dynamics Simulation and Experiments

Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending

Balanced Strength and Toughness Improvement in Polylactide (Pla)/poly(1,4-Cyclohexylene Dimethylene Terephthalate Glycol) (PCTG) Blends Using Various Compatibilizers

Supertoughened Polylactide Via the Addition of Low Content Poly(-caprolactone) and Tensile Deformation above the Glass Transition Temperature

Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance.

Influence of Fused Deposition Molding Printing Process on the Toughness and Miscibility of Polylactic Acid/Polycaprolactone Blends

Super‐toughened Poly(l‐lactic Acid) Fabricated Via Reactive Blending and Interfacial Compatibilization

Design of Toughed Bio-Based Polylactide/polyamide 11 Blends with Regulatable Size of Dispersed Phase and Spherulites by Interfacial Stereocomplex Crystallites

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Toward Highly Toughened Polylactide/Polycaprolactone‐Based Polyurethane Blends With Shape Memory Property via Reactive Blending

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Highly Toughened and Heat Resistant Poly(l-Lactide)/poly(ε-caprolactone) Blends Via Engineering Balance Between Kinetics and Thermodynamics of Phasic Morphology with Stereocomplex Crystallite

Super Toughened and High Heat-Resistant Poly(Lactic Acid) (Pla)-Based Blends by Enhancing Interfacial Bonding and PLA Phase Crystallization

Toughening Modification of Poly(lactic acid) via Melt Blending

Phase morphology, rheological behavior and mechanical properties of supertough biobased poly(lactic acid) reactive ternary blends

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization