Abstract:Super-tough poly(lactic acid)/polycarbonate (PLA/PC) (50/50) blends with an excellent balance of stiffness, toughness, and thermal stability were systematically designed and characterized. Poly(methyl methacrylate) (PMMA) was utilized as a novel, highly effective nonreactive interphase to promote PLA-PC phase compatibility. Partial miscibility of PMMA with both PLA and PC produced strong molecular entanglements across the PLA-PC phase boundary followed by an excellent phase adhesion. This was predicted from interfacial energy measurements and supported by dynamic mechanical thermal analysis, morphological observations, and mechanical tests. Ternary PLA/PC/PMMA blends exhibited an exceptional set of stiffness, tensile and flexural strength, tensile and flexural ductility, and thermal stability together with improved impact strength compared with neat PLA and uncompatibilized PLA/PC blends. Addition of nonreactive polybutadiene-g-styrene-co-acrylonitrile (PB-g-SAN) impact modifier to the compatibilized blend resulted in further dramatic improvements in the dispersion state of PC and PMMA phase domains followed by the development of an interconnected structure of PC, PMMA, and PB-g-SAN domains in the PLA matrix. Such a network-like morphology, with rubbery particles percolated at the interface between the dispersed structures and surrounding PLA matrix, produced a tremendous increase in impact resistance (≈700 J/m) and tensile ductility (≈200% strain) while maintaining excellent stiffness (≥2.1 GPa). The combined effects of interfacial localization of impact modifier particles, network-like morphology (extended over the entire volume of the blend), and strong phase interactions between the components (due to mutual miscibility) are described to be responsible for super-tough behavior. The role of PMMA as an efficient interphase adhesion promoter in the toughened quaternary blends is also clarified. Impact fractography revealed multiple void formations, plastic growth of microvoids, and the formation of void-fibrillar structures around as well as inside the dispersed structures as the main micromechanical deformation processes responsible for massive shear yielding and plastic deformation of blends. Blends designed in this work offer remarkable improvements in tensile and flexural ductility, impact resistance, and heat deflection temperature compared with neat PLA resin. The overall characteristics of these blend systems are comparable and/or superior to those of several commercial thermoplastic resins.

Toward Highly Toughened Polylactide/Polycaprolactone‐Based Polyurethane Blends With Shape Memory Property via Reactive Blending

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Sustainable polylactide/polycaprolactone based polyurethane blends fabricated via reactive compatibilization

A study on the mechanical, thermal properties and crystallization behavior of poly(lactic acid)/thermoplastic poly(propylene carbonate) polyurethane blends

The morphology, properties, and shape memory behavior of polylactic acid/thermoplastic polyurethane blends

Design of Tough, yet Strong, Heat-resistant PLA/PBAT Blends with Reconfigurable Shape Memory Behavior by Engineering Exchangeable Covalent Crosslinks

Preparation of super toughened flame-retardant polylactic acid with an in situ hyperbranched structure by reactive blending with a phosphorus-containing copolyester and hexamethylene glycidyl cyclotriphosphazene

Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blends

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ε-caprolactone) blends

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Toughening and Shape Memory Effect on PLA/Copolymers Blends Produced by Simultaneous Dynamic Vulcanization and Reactive Compatibilization

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Toughening Modification of Poly(lactic acid) via Melt Blending

A novel multi-triggered reversible shape memory thermoplastic polyurethane (TPU)/polycaprolactone (PCL) blend

Super-Tough PLA-Based Blends with Excellent Stiffness and Greatly Improved Thermal Resistance via Interphase Engineering

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Sustainable and high‐performance ternary blends from polylactide, CO 2 ‐based polyester and microbial polyesters with different chemical structure

Poly (ethylene-butylacrylate-glycidyl methacrylate) reaction compatibilized poly (lactic acid)/poly (3-hydroxybutyrate-4-hydroxybutyrate) blends with enhanced mechanical property, biodegradability and thermal stability

In-situ self-reinforcement of amorphous polylactide (PLA) through induced crystallites network and its highly ductile and toughened PLA/poly(butylene adipate-co-terephthalate) (PBAT) blends