Preparation of EVA modified urea-formaldehyde resin/stone powder composite materials

Can LIU,Yun-wu ZHENG,Ji-you GU,Yuan-bo HUANG,Xiao-qin YANG,Zhi-feng ZHENG

DOI: https://doi.org/10.3969/j.issn.1001-5922.2015.08.009

2015-01-01

Abstract:In this paper, the urea-formaldehyde(UF) resin was modified with ethylene-vinyl acetate copolymer(EVA), and the modified resin was mixed with stone powder to prepare the composite materials. The results showed that with increasing the EVA amount in UF resin, there were no significant changes of pH value and viscosity, but the free formaldehyde content was proportional to the amount of EVA. After adding EVA, the bonding strength of the composite material did not obviously increase, the highest values of the bonding and impact strength were 3.71 MPa only and 1.54 KJ/m , respectively; the hardness of composite material was somewhat increased, but the change was small. So what, the addition of EVA emulsion increased to a certain extent the toughness and strength of the composite material, but the margin was small. The modification effect of composite material with EVA was not remarkable as with PVF.