Abstract:Process diagram of composite samples and performance test. Currently, with the development of many important fields such as aerospace and automotive industries, polymer composites have become an indispensable part of these fields. As for preparation methods, common methods like hot pressing make composites difficult to achieve continuous production. This paper proposed the continuous forced assembly (CFA) and designed continuous production facility, which can achieve the continuous preparation of low filler content (30 wt%) composites with high electrical/thermal conductivity. Besides, we structurally designed roll pressing device and explored its effect on the machining process. Here, short cut carbon fiber (SCF) and solid silica gel (MVQ) are used as electrically/thermally conductive filler and polymer matrix respectively, and continuous preparation of functional composites is completed by CFA method. Compared to the thermal conductivity (1.186 W/(m·K)) of SCF/MVQ composites prepared with lower viscosity matrix (MVQ‐A), the thermal conductivity of composites prepared with high viscosity matrix (MVQ‐D) reached 2.230 W/(m·K). Meanwhile, the process is optimized to explore the effects of the "accordion folding" and "pre‐stretch" methods on the thermal conductivity of composites, the thermal conductivity is converted from in‐plane to vertical direction. In addition, under the same filler content, 2 wt% rGO is beneficial in enhancing the electrical/thermal conductivity of prepared composites. The electrical conductivity and thermal conductivity of SCF28/rGO2/MVQ composite reach 663 S/m and 2.82 W/(m·K), which is higher than that of the properties of SCF/MVQ composite with the same filler content. To sum up, CFA facilitates continuous production of composites, which can be used in thermal management materials (TMMs). Highlights Compared with the "pre‐stretch" method, the thermal conductivity of SCF/MVQ composites prepared by "accordion folding" has a significant improvement. The SCF/rGO/MVQ composites prepared by CFA method show superior thermal conductivity and electrical conductivity. Composites prepared by CFA method can realize the continuous preparation of functional materials.

Preparation and application of flexible ethylene‐vinyl acetate adhesive composites by ultrasonic‐assisted forced infiltration

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Improving thermal conductivity of ethylene-vinyl acetate composites by covalent bond-connected carbon nanotubes@boron nitride hybrids

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Electrical and thermal conductivity of ethylene vinyl acetate composite with graphene and carbon black filler

Effect of EVA Polymer and PVA Fiber on the Mechanical Properties of Ultra-High Performance Engineered Cementitious Composites

Epoxy Laminated Composites Reinforced with Polyethyleneimine Functionalized Carbon Fiber Fabric: Mechanical and Thermal Properties

Carbon nanotube-vertical edge rich graphene hybrid sponge as multifunctional reinforcements for high performance epoxy composites

Effect of carbon nanotubes on the interface evolution and dielectric properties of polylactic acid/ethylene–vinyl acetate copolymer nanocomposites

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids

Excellent interfacial bonding in UHMWPE fiber/ epoxy resin composites fabricated via a swelling approach

Effects of Crosslinking and Silicone Coupling Agent on Properties of EVA Composite Hot Melt Adhesive

Factor analysis on property enhancement of electrically/thermally conductive composites by continuous forced assembly

Preparation of EVA modified urea-formaldehyde resin/stone powder composite materials

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Electrically Conductive Adhesives Based on Thermoplastic Polyurethane Filled with Silver Flakes and Carbon Nanotubes

A nanomodified-ultrasonic method to improve the shear strength of adhesively bonded composite joints

Preparation of graphene intercalated magnesium silicate for enhancing the thermal stability and thermal conductivity of ethylene-vinyl acetate copolymer

Rapid Electrothermal Response and Excellent Flame Retardancy of Ethylene‐vinyl Acetate Electrothermal Film

Carbon nanotubes grafting aminated epoxy resin with improved elasticity and surface adhesion for enhanced thermal management performance

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films